IRLML0060TRPBF N-Channel MOSFET, 60V 3.7A, SOT-23 Package

IRLML0060TRPBF Overview

The IRLML0060TRPBF is a high-performance N-channel MOSFET designed for efficient switching and low power loss across a range of industrial and commercial electronic systems. This compact device, housed in a SOT-23 package, offers low R_DS(on) and robust voltage ratings, making it suitable for space-constrained circuits demanding reliable power management. Its design delivers superior energy efficiency and fast switching speeds, which are essential for today??s demanding applications. For engineers and procurement specialists, this MOSFET provides a dependable solution for optimizing PCB real estate and enhancing overall system performance. Производитель ИС

IRLML0060TRPBF Technical Specifications

Параметр	Значение
Тип транзистора	N-Channel MOSFET
Напряжение сток-исток (VDS)	60 V
Непрерывный ток стока (ID)	3.7 A
RDS(on) (Max)	0.029 ?? @ 4.5V
Пороговое напряжение затвора (VGS (th))	1.0 V (min) ÿ 2.5 V (max)
Package / Case	SOT-23-3
Диапазон рабочих температур	-55??C до +150??C
Тип крепления	Монтаж на поверхность
Полярность	N-Channel

IRLML0060TRPBF Key Features

• Low R_DS(on): With a maximum on-state resistance of 0.029 ?? at 4.5V, this MOSFET minimizes conduction losses, resulting in higher efficiency and reduced heat generation in power switching applications.
• High Drain Current: Supports continuous drain currents up to 3.7 A, enabling use in moderate power loads while maintaining device reliability.
• Logic-Level Gate Drive: Operates with low gate threshold voltages, making it compatible with typical logic-level drive circuits and facilitating easy integration into microcontroller-based designs.
• Compact SOT-23 Package: The small footprint enables high-density PCB layouts, ideal for applications where space is at a premium.
• Wide Operating Temperature: Rated for -55??C to +150??C operation, it is suitable for use in harsh industrial environments or demanding thermal conditions.

IRLML0060TRPBF Advantages vs Typical Alternatives

This N-channel MOSFET stands out due to its combination of low R_DS(on), high drain current capability, and logic-level drive compatibility. These attributes translate to lower power losses, enhanced efficiency, and flexible integration in a diverse range of circuits. For design engineers, the compact SOT-23 package further reduces board space requirements compared to larger form factors, supporting advanced miniaturization without sacrificing performance.

Типовые применения

• Load Switching for Portable Devices: The device??s low on-resistance and compact SOT-23 form factor make it ideal for battery-powered systems and portable instruments where space, efficiency, and thermal performance are critical.
• DC-DC Converter Switching: Its fast switching speed and robust current handling suit it well for use as a switching element in voltage regulation and power supply circuits.
• Motor Driver Circuits: Suitable for driving small DC motors or actuators in embedded and automation solutions due to its logic-level gate compatibility.
• General Purpose Switching: Can be used for relay replacement, signal routing, or low-side switching in a wide range of industrial and consumer electronics.

IRLML0060TRPBF Brand Info

This MOSFET is a product tailored for designers seeking reliable, compact, and efficient power switching solutions. Its SOT-23 package, low R_DS(on) characteristics, and logic-level operation make it a widely adopted component in the industry. The part is manufactured to stringent quality standards, ensuring consistent electrical performance and long-term reliability for a broad array of electronic applications where size, efficiency, and ruggedness are paramount.

ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ

What is the primary benefit of using a logic-level MOSFET in circuit designs?

Logic-level MOSFETs can be driven directly by standard logic circuits or microcontroller outputs, eliminating the need for complex gate drive circuitry. This simplifies PCB design and reduces both component count and overall system cost.

How does the compact SOT-23 package impact system design?

The SOT-23 package allows for high-density component placement, making it especially suitable for applications with limited board space. Its surface-mount format also supports automated assembly processes in modern manufacturing.

Can this MOSFET handle inductive loads such as motors or relays?

Yes, with proper flyback protection, it is suitable for switching inductive loads like small motors and relays. Its robust current rating and fast switching characteristics help ensure reliable operation in these scenarios.

What is the significance of low R_DS(on) for power applications?

A low on-resistance minimizes conduction losses and heat generation when the device is on. This leads to higher energy efficiency, reduced cooling requirements, and longer device lifespan, which are critical in power-sensitive designs.

Is the IRLML0060TRPBF suitable for use in high-temperature environments?

Yes, with an operating temperature range of -55??C to +150??C, the device is designed to perform reliably in demanding thermal conditions, making it appropriate for industrial and automotive applications where heat tolerance is essential.