High-Speed Serial-to-Parallel Shift Register for Digital Control Systems
O SN74HC595N is a high-speed, 8-bit serial-in, parallel-out shift register with a storage register and 3-state outputs. Manufactured by Texas Instruments (TI), this device is part of the HC logic family and is widely used in digital electronics for expanding output capabilities in microcontroller-based systems. With its robust performance, low power consumption, and ease of integration, it is a preferred choice for engineers and designers working on industrial, automotive, and consumer electronics applications.
Technical Overview of the SN74HC595N Shift Register
This device is designed to convert serial data input into parallel output, making it ideal for applications where microcontroller I/O pins are limited. The SN74HC595N features a serial input (DS), a shift register clock input (SHCP), a storage register clock input (STCP), and an output enable (OE) pin. It allows cascading of multiple devices for extended output capabilities, making it scalable for complex systems.
🔥 Produtos mais vendidos
-
TLC555 Timer IC - Timer de Precisão da Texas Instruments em Pacote PDIP-8
-
Amplificador operacional de entrada JFET de baixo ruído TL081 da Texas Instruments - Pacote DIP-8
-
Controlador PWM de modo de corrente UC3842 da Texas Instruments - Pacote DIP-8
-
Texas Instruments LM2937 Regulador de Tensão Pacote TO-220 - Baixa Queda Linear
Caraterísticas principais
- 8-bit serial-in, parallel-out shift register
- 3-state outputs for bus-oriented applications
- Wide operating voltage range: 2V to 6V
- High-speed CMOS technology
- Baixo consumo de energia
- Direct interface with TTL devices
- Output drive capability: ±6 mA at 5V
Especificações técnicas
Parâmetro | Valor |
---|---|
Família lógica | HC (High-Speed CMOS) |
Number of Bits | 8 |
Tensão de alimentação (Vcc) | 2V to 6V |
Gama de tensão de entrada | 0V to Vcc |
High-Level Output Current | -6 mA at 5V |
Low-Level Output Current | 6 mA at 5V |
Propagation Delay (tpd) | 15 ns (typical at 5V) |
Gama de temperaturas de funcionamento | -40°C to 85°C |
Tipo de embalagem | DIP-16 |
Why Choose This Shift Register Over Alternatives?
The SN74HC595N offers several performance advantages over typical shift registers in the same category. Its high-speed CMOS technology ensures faster data transfer and lower power consumption, which is critical in battery-powered and high-efficiency systems. Unlike older TTL-based devices, this model supports a wider voltage range, making it more versatile for modern microcontroller platforms such as Arduino, STM32, and Raspberry Pi.
Another key benefit is its 3-state output capability, which allows multiple devices to share the same output lines without interference. This feature is essential in bus-oriented systems where multiple devices communicate over a shared data line. Additionally, the ability to cascade multiple units enables designers to expand output lines without increasing microcontroller pin usage, reducing system complexity and cost.
🌟 Produtos em destaque
-
"Comprar MAX9312ECJ+ Comparador de Tensão de Precisão em Pacote DIP para um Desempenho Fiável"
-
Modelo 0339-671-TLM-E - Pacote TLM-E de alto desempenho para funcionalidade aprimorada
-
1-1415898-4 Caixa do conetor, fio elétrico para placa, recetáculo, embalado
-
1-1462039-7 Conector elétrico, montagem em placa de circuito impresso, orifício de passagem, tomada de cabeça de 2 pinos
According to industry professionals and embedded system engineers, the SN74HC595N is a go-to solution for reliable and scalable output expansion. Its proven performance in industrial and commercial applications has made it a staple in the electronics design community.
Aplicações típicas em eletrónica industrial e de consumo
The SN74HC595N is widely used in applications that require multiple digital outputs controlled by a limited number of microcontroller pins. Common use cases include:
📩 Contactar-nos
- Ecrãs de matriz LED and 7-segment displays
- Keypad scanning and input/output expansion
- Industrial automation control panels
- Eletrónica de consumo such as digital clocks and home appliances
- Robotics for controlling multiple actuators or indicators
Its compact DIP-16 package and ease of use make it ideal for both prototyping and mass production environments.
Sobre a Texas Instruments (TI)
Texas Instruments is a globally recognized leader in analog and embedded processing semiconductor solutions. With decades of innovation and a strong commitment to quality, TI components are trusted by engineers worldwide. The SN74HC595N is part of TI’s extensive portfolio of logic devices, known for their reliability, performance, and long-term availability.
Perguntas frequentes (FAQ)
1. What is the main function of this shift register?
The SN74HC595N converts serial data input into parallel output, allowing microcontrollers to control multiple outputs using only a few pins. It is ideal for expanding digital I/O capabilities.
2. Can I cascade multiple units for more outputs?
Yes, the device supports cascading. You can connect the QH’ (serial out) of one unit to the DS (serial in) of the next to control multiple 8-bit registers in series.
3. Is this device compatible with 3.3V microcontrollers?
Yes, the SN74HC595N operates from 2V to 6V, making it compatible with both 3.3V and 5V logic levels. Always ensure voltage levels match your system requirements.
4. What is the benefit of 3-state outputs?
3-state outputs allow the device to disconnect from the output bus when not in use, enabling multiple devices to share the same output lines without conflict or interference.
5. What package type is available for this model?
The SN74HC595N is available in a DIP-16 package, which is suitable for through-hole PCB designs and breadboard prototyping, offering ease of handling and soldering.</