TMS320F2802PZA-60 Overview
This request targets the TMS320F2802PZA-60 product brief and requires the original product sheet to produce an accurate, specification-driven description. I cannot invent numeric ratings or peripheral counts. To create precise technical copy, including tables and comparisons, I will need the referenced datasheet or product sheet. Once the sheet is available, I will deliver a clear, engineer-focused overview and full specification table with direct citations to the source. For supply-chain or vendor reference, see IC Manufacturer for manufacturer contact and ordering paths.
TMS320F2802PZA-60 Technical Specifications
| Parameter | Value / Reference |
|---|---|
| Device identifier | Refer to the official product sheet for exact device ID and ordering codes |
| Core type | Refer to the official product sheet for confirmed core architecture |
| Maximum CPU clock | Refer to the official product sheet for exact MHz rating |
| On-chip memory | Refer to the official product sheet for Flash and RAM sizes |
| Analog peripherals | Refer to the official product sheet for ADC resolution and channel count |
| Control peripherals | Refer to the official product sheet for PWM, timer, and comparator details |
| Communications | Refer to the official product sheet for serial interfaces (SPI, UART, I2C, etc.) |
| Package / pins | Refer to the official product sheet for package type and pin count |
| Operating temperature | Refer to the official product sheet for industrial and commercial ratings |
TMS320F2802PZA-60 Key Features
- Device identification ?C Exact core and clock ratings are supplied in the official sheet for verified performance comparisons.
- Peripheral integration ?C The product sheet lists integrated ADC, PWM, timers and serial interfaces and explains how they reduce external BOM and board area.
- Control-oriented I/O ?C The data sheet provides pin mapping and peripheral routing that support deterministic control loops and lower latency.
- Qualification and reliability ?C Qualification, temperature grades and lifecycle details appear in the official sheet to support procurement and design-in decisions.
Typical Applications
- Industrial motor control systems where confirmed PWM timing and synchronized ADC sampling are required; consult the product sheet for validated peripheral sets and timings.
- Power-conversion and digital power supply designs that need documented control peripherals and electrical ratings; use the product sheet to verify thermal and voltage limits.
- Embedded control nodes in factory automation that require known serial interfaces and pinouts; check the datasheet for recommended interface options and footprint choices.
- Sensor fusion and precision measurement front-ends that rely on ADC accuracy and timing; reference the product sheet for ADC resolution, sample rates, and calibration notes.
TMS320F2802PZA-60 Advantages vs Typical Alternatives
Specific competitive advantages depend on the exact on-chip peripherals, memory sizes, and clock rating listed in the official product sheet. The source sheet enables direct numerical comparisons for CPU frequency, ADC resolution, PWM channels, and package density versus similar control-oriented MCUs. Use the manufacturer data to compare integration level, BOM reduction potential, and thermal/voltage operating ranges to select the best alternative for a given industrial design.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
TMS320F2802PZA-60 Brand Info
Brand and manufacturer details for this part are contained in the official product sheet and packaging documentation. The sheet will identify the vendor, recommended ordering codes, authorized distributors, and relevant quality or lifecycle information for sourcing and long-term support.
FAQ
What is needed to produce a full datasheet summary?
I require the official product or datasheet for the TMS320F2802PZA-60 to extract accurate numeric specs, peripheral counts, and package details. The sheet is the authoritative source for design, procurement, and compliance decisions.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Can I get pinout and package details here?
Pinout and package information must come from the manufacturer??s product sheet. That document contains diagrams, pin descriptions, and mechanical drawings needed for PCB layout and assembly.
How should I compare this part to alternatives?
Compare clock speed, memory sizes, ADC resolution, PWM/timer counts, and operating-temperature grades from the official sheet against competitor datasheets to make an objective selection for your application.
📩 Contact Us
Will you include sourcing and lifecycle info?
The product sheet and manufacturer resources include ordering codes, distributor listings, and lifecycle or obsolescence notes. Those items are necessary to support sourcing and long-term procurement planning.
What can I send next?
Provide the official product sheet, a PDF, or a direct link to the manufacturer datasheet. With that source, I will create a full specification table, feature list, application guidance, and an SEO-optimized product description tailored to engineers and sourcing specialists.