PS-26SD-D4C2 Overview
The PS-26SD-D4C2 is a precision semiconductor device designed for industrial and electronic applications requiring robust performance and reliability. This component offers optimized electrical characteristics that ensure stable operation across a range of conditions, making it suitable for integration into complex electronic systems. Engineered with advanced fabrication techniques, it delivers consistent output and high sensitivity essential for modern automation and control technologies. Sourcing specialists and design engineers will appreciate its balance of efficiency and durability, which supports long-term system reliability. For detailed technical insights and procurement options, visit IC Manufacturer.
PS-26SD-D4C2 Technical Specifications
| Parameter | Specification |
|---|---|
| Device Type | Semiconductor Sensor Module |
| Operating Voltage | 3.3 V to 5 V |
| Output Type | Digital Pulse Output |
| Response Time | Less than 10 ms |
| Detection Range | Up to 50 mm |
| Operating Temperature Range | -20 ??C to +85 ??C |
| Power Consumption | Max 60 mW |
| Package Type | Compact 4-pin SIP |
| Output Current | Up to 20 mA |
| Mounting Type | PCB Through-hole |
PS-26SD-D4C2 Key Features
- High Sensitivity Detection: Provides accurate signal output with minimal noise, enabling precise measurement in industrial sensors and control circuits.
- Wide Operating Voltage Range: Supports 3.3 V to 5 V supply, ensuring compatibility with various digital systems and microcontrollers.
- Fast Response Time: Less than 10 milliseconds response enables real-time feedback, critical for automation and dynamic control applications.
- Compact and Durable Package: The 4-pin SIP form factor allows easy PCB integration while maintaining mechanical robustness under harsh conditions.
PS-26SD-D4C2 Advantages vs Typical Alternatives
This device stands out with its combination of low power consumption and rapid response time, offering engineers a reliable solution that minimizes system energy use without compromising performance. Its robust detection range and stable output improve accuracy compared to typical semiconductor sensors, enhancing overall system efficiency and reducing maintenance requirements in industrial environments.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Industrial automation systems where precise object detection and fast signal processing are necessary for conveyor control and robotic positioning.
- Embedded control units in manufacturing equipment requiring reliable sensing modules for fault detection and operational feedback.
- Consumer electronics that demand compact and energy-efficient sensors for user interface and environmental monitoring.
- Automotive subsystems needing durable and stable semiconductor sensors for proximity detection and safety mechanisms.
PS-26SD-D4C2 Brand Info
The PS-26SD-D4C2 is part of a semiconductor line developed by a reputable manufacturer specializing in industrial-grade electronic components. This product reflects the brand??s commitment to high-quality, precision-engineered devices that meet stringent industry standards. Designed with a focus on durability and consistent performance, it supports a wide range of applications, reinforcing the manufacturer??s position as a trusted supplier in the semiconductor market.
FAQ
What is the typical operating voltage range for this sensor module?
The device operates reliably within a voltage range of 3.3 to 5 volts, making it compatible with most common digital systems and microcontroller platforms used in industrial and embedded electronics.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How does the response time impact its application in automation?
A response time under 10 milliseconds allows the sensor to provide near-instantaneous signals, which is critical for real-time control and monitoring in automation systems, ensuring timely and accurate process adjustments.
What type of output does this semiconductor provide?
The product features a digital pulse output, delivering clear and noise-immune signals that facilitate straightforward integration with digital input circuits and microcontrollers without additional signal conditioning.
📩 Contact Us
Can this device operate under harsh environmental conditions?
Yes, it is specified to function effectively within a temperature range from -20 ??C to +85 ??C, making it suitable for a variety of industrial environments where temperature fluctuations are common.