MSPM0L1305SDGS20R Overview
The MSPM0L1305SDGS20R listing is identified by its full ordering code and requires the accompanying product sheet for accurate electrical, mechanical, and thermal details. For engineers and sourcing specialists, a verified datasheet enables precise comparisons across voltages, currents, package dimensions, and temperature grades. This summary does not assume values or brand attributes and will convert the official parameters into clear procurement and design guidance once the sheet is provided. For verified manufacturer and ordering information, reference IC Manufacturer as the initial lookup point for the official product record.
MSPM0L1305SDGS20R Technical Specifications
| Parameter | Value / Source |
|---|---|
| Part number | MSPM0L1305SDGS20R |
| Package type | Refer to the official product sheet for package naming and pin count |
| Number of pins | See the datasheet for exact pin count and pin assignments |
| Input voltage range | Documented on the supplier datasheet |
| Output ratings / currents | Supplied on the official specification sheet |
| Operating temperature | Defined per datasheet; verify industrial or commercial grade |
| Maximum power dissipation | Refer to thermal specifications on the datasheet |
| Package dimensions (L??W??H) | See mechanical drawing in product sheet for precise millimeter values |
| Key compliance / certifications | Listed on the official datasheet or compliance notes |
MSPM0L1305SDGS20R Key Features
- Clear identification: A full ordering code that maps to one exact product record, enabling precise procurement and BOM control.
- Datasheet-driven design: All electrical and mechanical characteristics are defined in the supplier sheet, which matters for accurate system-level validation.
- Integration readiness: Package and pin information on the official drawing allows direct footprint implementation and assembly verification.
- Traceable sourcing: Manufacturer and ordering information in the datasheet support cross-reference and lifecycle management decisions.
Typical Applications
- Use in circuit-level evaluations where exact electrical parameters are needed to size supporting passive components and thermal solutions for reliable operation.
- Deployment in production BOMs where the verified ordering code reduces sourcing errors and supports long-term supply chain planning and alternative sourcing.
- In PCB layout workflows where the mechanical drawing and pin assignments inform footprint creation and pick-and-place programming for assembly lines.
- In qualification and validation test plans where operating temperature and power dissipation data from the datasheet determine stress-testing and reliability margins.
MSPM0L1305SDGS20R Advantages vs Typical Alternatives
Comparative evaluation requires the official datasheet. Having the exact part code makes it faster to compare this device against 1?C5 alternatives by matching package, voltage range, current handling, and thermal limits. Using the verified sheet reduces ambiguity versus similarly named parts and shortens time-to-decision for engineers and sourcing teams. The primary advantage is traceability: one definitive source for specifications, mechanical drawings, and compliance notes that supports confident substitution, cost comparison, and risk assessment.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSPM0L1305SDGS20R Brand Info
The brand identity and corporate profile for MSPM0L1305SDGS20R are documented in the manufacturer??s catalog and product sheet. Use the supplier listing, authorized distributor pages, or the official product record to confirm brand, part family, and lifecycle status. Brand-specific support channels and technical resources are referenced directly from the manufacturer??s datasheet and website.
FAQ
Where is the datasheet?
The authoritative datasheet is available from the product??s manufacturer or authorized distributors. It contains electrical ratings, pin assignments, package drawings, and thermal data required for design and procurement verification.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How to confirm package footprint?
Confirm footprint dimensions by consulting the mechanical drawing section of the official product sheet. That drawing provides exact millimeter values for land pattern creation and assembly tolerances.
Can I compare equivalent parts?
Yes. Use the full ordering code to compare against alternatives on parameters such as voltage range, current rating, operating temperature, and package size as listed in each part??s datasheet.
📩 Contact Us
Where to find compliance details?
Compliance, certifications, and material declarations are listed in the manufacturer??s datasheet or regulatory documents. Check those sections for RoHS, REACH, and other applicable marks.
Who to contact for samples or support?
Contact the manufacturer??s sales or technical support as listed in the official product documentation or distributor pages. They provide samples, application notes, and clarification for design-in questions.