MSPM0L1304SRTRR 32-bit Cortex-M0 MCU, Tape-and-Reel

MSPM0L1304SRTRR Overview

The following deliverable requires the official product datasheet for an accurate, specification-driven description of MSPM0L1304SRTRR. I will assemble full technical copy, tables, and application guidance once the sheet content is available. For sourcing and reference, include the original datasheet or a direct vendor link. Visit IC Manufacturer for vendor lookup tools and typical datasheet repositories. Supplying the sheet enables precise numerical values, pinout details, thermal limits, and ordering information required by engineers and sourcing specialists.

MSPM0L1304SRTRR Technical Specifications

MSPM0L1304SRTRR Key Features

• Data-driven specification ?? the definitive electrical and thermal numbers come from the official datasheet for correct design margins.
• Package and footprint ?? package details in the sheet enable reliable PCB layout and mechanical integration.
• Reliability indicators ?? lifetime, derating, and thermal resistance are specified in the datasheet and guide safe operating area decisions.
• Regulatory and ordering info ?? compliance marks, orderable quantities, and reel codes are listed by the manufacturer and crucial for sourcing.

Typical Applications

• Board-level engineering evaluation and replacement work where the official datasheet defines pin compatibility and power handling for safe retrofit use.
• Prototype power architecture and test rigs that require exact thermal and electrical numbers from the datasheet to size cooling and protection components.
• Production sourcing and BOM management where precise ordering codes, reel quantities, and compliance declarations from the datasheet are required.
• Design validation and reliability testing where datasheet limits guide margining, derating curves, and environmental stress screening decisions.

MSPM0L1304SRTRR Advantages vs Typical Alternatives

Direct comparison requires the full datasheet to extract measurable differences such as voltage ratings, on-resistance, switching speed, and thermal resistance. With the official numbers, engineers can compare electrical and thermal metrics side-by-side and evaluate trade-offs in power efficiency, board area, and heat sinking. Sourcing specialists can then weigh order codes, lead times, and compliance statements to choose the best alternative for production and cost targets.

MSPM0L1304SRTRR Brand Info

Brand identification and official supplier details for MSPM0L1304SRTRR are available in the manufacturer datasheet and part-marking records. I will extract the exact brand name, trademark usage, and authorized distributor list once the sheet or vendor link is supplied. That information is essential for verifying warranty, support channels, and cross-reference data for procurement.

FAQ

What is the package outline?

Package outline and exact dimensions are defined in the product datasheet. Those mechanical drawings are required to populate CAD models, check board fit, and confirm thermal pad geometry.

What are the electrical limits?

Electrical limits such as maximum voltage, current, and timing must be taken from the electrical characteristics table in the datasheet to ensure correct circuit design and safe operation.

How to verify thermal performance?

Thermal resistance, junction-to-case, and allowable power dissipation are listed in the thermal section of the datasheet. Use those values to size heatsinks and estimate junction temperature under load.

Where to get ordering information?

Ordering codes, reel sizes, minimum order quantities, and lead times are provided by the manufacturer and authorized distributors in the datasheet and product ordering guide.

Can I get an application note?

Application circuits, layout recommendations, and evaluation board references are often included or cited in the datasheet; the manufacturer??s support portal holds any additional application notes or design files.