MSP430I2020TRHBT Overview
The MSP430I2020TRHBT is a microcontroller part number that requires the official product sheet to generate a complete, accurate technical profile and application guidance. To ensure specification accuracy, electrical limits, memory sizes, package data, and ordering codes are sourced directly from the manufacturer??s documentation. Once the sheet is supplied, this overview will be expanded into a concise, value-focused summary with power, memory and I/O highlights, and procurement-ready details. For reference on sourcing and authorized distributor channels visit IC Manufacturer.
MSP430I2020TRHBT Technical Specifications
| Parameter | Value / Source |
|---|---|
| Core Architecture | Refer to supplied product sheet for the exact core and instruction set |
| Operating Voltage | See official datasheet for minimum and maximum supply voltages (V) |
| Clock Frequency (max) | Specified in the manufacturer sheet (MHz) |
| Non-volatile Memory | Program/Flash size per datasheet (bytes/kB) |
| RAM | On-chip RAM size as listed in the product documentation (bytes) |
| Number of I/O Pins | Package pin count and usable I/O listed on the sheet (pins) |
| Operating Temperature Range | Temperature limits per datasheet (??C) |
| Package / Shipping | Full package code and tape-and-reel info shown in the product sheet |
| Static Current / Active Current | Power consumption figures are provided in the manufacturer documentation (??A/mA) |
| Peripherals / Interfaces | List of on-chip peripherals and communication interfaces appears on the datasheet |
MSP430I2020TRHBT Key Features
- Single 16-bit RISC-style microcontroller core capability delivering compact code and predictable timing for control tasks when confirmed by the datasheet.
- Low-power operational modes plus ultra-low standby capability to extend battery life in embedded and portable applications, per official power figures.
- Integrated mixed-signal peripherals that simplify system-level integration and reduce external component count when matched to system requirements.
- Available package and reel options for high-volume assembly and streamlined sourcing; exact package dimensions and reel ordering codes are provided in the manufacturer documentation.
Typical Applications
- Battery-powered sensors and data-loggers where long standby life and deterministic wake-up behavior reduce maintenance intervals and extend field deployment.
- Industrial control nodes in distributed systems that require compact 16-bit control logic with on-chip peripherals for I/O and communication buffering.
- Consumer electronics control panels and handheld meters that benefit from low-power operation and modest memory for fixed-function firmware.
- Smart metering and portable instrumentation that need reliable operation across temperature ranges and vendor-backed packaging for volume production.
MSP430I2020TRHBT Advantages vs Typical Alternatives
When compared to typical 8-bit or higher-power 32-bit alternatives, this part family is positioned to offer lower average power consumption and a compact 16-bit instruction set that can reduce code size and memory needs. The integration of standard mixed-signal peripherals can lower system BOM cost and simplify board layout. For procurement and design decisions, reference the manufacturer??s datasheet for exact electrical, thermal, and mechanical parameters to quantify advantages vs specific competitor parts.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSP430I2020TRHBT Brand Info
The MSP430I2020TRHBT part number aligns with Texas Instruments?? MSP430 microcontroller family. Texas Instruments provides extensive technical documentation, application notes, and long-term supply channels. For accurate ordering, performance specs, and lifecycle details refer to TI??s official datasheet and product support resources.
FAQ
What data do you need?
Provide the official product datasheet or technical sheet for MSP430I2020TRHBT so exact numerical specifications, package drawings, and electrical limits can be used to create compliant documentation.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Can you list pinout details?
Yes. Once the product sheet is available, pin assignments, electrical characteristics per pin, and recommended PCB land patterns will be transcribed directly from the manufacturer documentation.
Will you include power figures?
Power consumption numbers such as active current, standby current, and power modes will be listed verbatim from the datasheet to avoid approximation and ensure correct thermal and battery sizing.
📩 Contact Us
Do you support sourcing and packaging info?
Yes. Package codes, tape-and-reel ordering suffixes, and MSDS/ROHS compliance statements from the manufacturer will be integrated into the procurement-ready content after receiving the sheet.
How quickly can you complete the spec sheet?
After receiving the official product documentation, a complete, vendor-accurate product description including a technical table and application notes can be delivered promptly, typically within one working day depending on complexity.