MSP430FR6922IRGCT Overview
This request requires the official product sheet to ensure every specification and numeric detail is accurate and verifiable. I do not have the referenced product sheet available in this session. To produce a complete, specification?accurate description, link or attach the device data sheet. Once the sheet is provided I will create a technical, sourcing?ready product description that cites only the sheet data and includes a precise specification table and targeted application guidance. See IC Manufacturer for distribution context.
MSP430FR6922IRGCT Technical Specifications
| Parameter | Value (from sheet required) |
|---|---|
| Core architecture | Refer to product sheet |
| Nonvolatile memory type | Refer to product sheet |
| Nonvolatile memory size | Refer to product sheet |
| Volatile RAM size | Refer to product sheet |
| Maximum operating frequency | Refer to product sheet |
| Operating voltage range | Refer to product sheet |
| Ambient temperature range | Refer to product sheet |
| Package type and pin count | Refer to product sheet |
| Peripherals (ADC, timers, communications) | Refer to product sheet |
| Typical current consumption | Refer to product sheet |
MSP430FR6922IRGCT Key Features
- Low?power 16?bit MCU ?? precise benefits and numbers require the sheet for exact values.
- FRAM nonvolatile memory ?? supports fast writes and high endurance; the sheet supplies exact capacity and endurance figures.
- Integrated analog and comms ?? on?chip ADC, timers, and serial interfaces reduce BOM and improve integration; specific counts are in the sheet.
- Multiple low?power modes ?? designed for battery?powered systems to extend run time; detailed currents are provided in the data sheet.
Typical Applications
- Battery?powered sensor nodes and metering systems that need nonvolatile program storage and low standby current; exact power figures are in the sheet for system budgeting.
- Industrial control endpoints where FRAM endurance and write performance reduce maintenance compared with block?erase flash alternatives.
- Portable user interfaces that require mixed?signal integration (ADC, comparators, timers) to lower component count and overall cost, with exact peripheral counts on the sheet.
- Energy measurement and smart?sensor designs that benefit from deterministic FRAM writes and multiple low?power modes to maximize battery life; data sheet contains consumption profiles for each mode.
MSP430FR6922IRGCT Advantages vs Typical Alternatives
The device typically offers FRAM advantages such as faster write speeds and higher endurance compared with conventional flash. It also combines low active and standby currents with integrated analog and serial peripherals to reduce system BOM and PCB area. For precise comparative numbers ?? memory size, endurance cycles, current in each low?power state, and peripheral counts ?? consult the official product sheet to validate advantages versus rival MCUs or older MSP430 variants.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSP430FR6922IRGCT Brand Info
The MSP430 family is a line of ultra?low?power microcontrollers from Texas Instruments. This device follows that lineage and focuses on energy efficiency, FRAM nonvolatile memory, and mixed?signal integration. Use the official TI product documentation and part marking references in the data sheet for sourcing and design?in details.
FAQ
Which company makes this MCU?
The MSP430 family is produced by Texas Instruments. Verify package codes, ordering information, and distribution channels in the official datasheet and TI ordering guides before procurement.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Where can I get exact specs?
Obtain the device data sheet and accompanying technical reference manual for definitive values such as memory size, pinout, electrical characteristics, and timing specifications. Use those documents for design validation and regulatory compliance checks.
What package does IRGCT indicate?
Package suffixes and temperature grades are defined in the manufacturer’s ordering and package tables. Consult the product sheet or TI ordering information to map IRGCT to the correct package and pin configuration.
📩 Contact Us
Can it be programmed with standard MSP430 tools?
MSP430 devices are typically supported by TI development tools and debug adapters. Confirm supported tool versions and debug interfaces in the datasheet and development documentation for this specific part number.
How do I confirm sourcing and lead times?
Check authorized distributors and the manufacturer’s website for current availability and lead times. Use exact part number and package suffix to obtain accurate stocking and procurement data from distribution partners.