MSP430FG4616IZCA Overview
The MSP430FG4616IZCA is a member of the MSP430 family of ultra?low?power, 16?bit microcontrollers. It targets embedded control tasks that require low energy consumption, deterministic real?time control and a mix of analog and digital peripheral functions. The device combines a compact CPU architecture with integrated system peripherals designed for sensor interfaces, motor control, industrial monitoring and portable instrumentation. For sourcing and manufacturer details, see IC Manufacturer.
MSP430FG4616IZCA Technical Specifications
| Parameter | Value / Notes |
|---|---|
| CPU Architecture | 16?bit RISC core (MSP430 family) |
| Operating Voltage | Refer to official product sheet for exact voltage range and recommended operating conditions |
| Clock Frequency | Refer to official product sheet for maximum CPU and peripheral clock rates |
| Flash Memory | Refer to official product sheet for device flash capacity and organization |
| SRAM | Refer to official product sheet for on?chip RAM size and retention details |
| Analog Peripherals | Includes on?chip ADC and comparator blocks; see datasheet for resolution and channel count |
| Digital Peripherals | Includes timers and serial interfaces (UART/USCI variants); see datasheet for exact counts and modes |
| Package | Refer to product sheet for package type, pin count and mechanical drawing |
| Temperature Range | See official product documentation for ambient and junction operating temperatures |
| Development Support | Supported by MSP430 development tools and software libraries; check vendor documentation for toolchain details |
MSP430FG4616IZCA Key Features
- Single 16?bit core delivers compact code density and efficient control for embedded tasks.
- Integrated analog functions enable direct sensor interfacing, reducing external components and board area.
- Low?power modes extend battery life in portable applications by minimizing active and standby consumption.
- On?chip timers and serial interfaces support real?time control and deterministic communication with peripherals.
Typical Applications
- Battery?powered sensor nodes and portable measurement instruments that need ultra?low power standby and precise analog capture over long deployment periods.
- Industrial monitoring and control modules that require deterministic timing, on?board analog conversion, and robust serial interfacing for field?bus integration.
- Motor control front?ends for small motors or actuators where compact code, integrated timers and analog feedback reduce BOM and simplify PCB layout.
- Consumer and handheld devices that demand low energy consumption, mixed?signal I/O and a small footprint to meet tight cost and space constraints.
MSP430FG4616IZCA Advantages vs Typical Alternatives
The device emphasizes ultra?low power operation and a 16?bit core design that often yields smaller code size compared with many 32?bit alternatives for the same control logic. Integrated analog and timing peripherals reduce external component count and PCB area, while the MSP430 ecosystem provides mature toolchains and libraries. For engineers sourcing a low?power mixed?signal MCU, this combination can deliver lower system power and simpler integration compared with discrete analog plus generic microcontrollers.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSP430FG4616IZCA Brand Info
The MSP430 series is a product line from Texas Instruments, a long?standing semiconductor vendor focusing on analog and embedded processing solutions. The MSP430 family is positioned for low?power embedded control, supported by TI development kits, compilers, and documentation tailored to industrial and portable applications.
FAQ
What core does this MCU use?
It uses a 16?bit MSP430 family RISC core designed for low code size and efficient control. This architecture is optimized for embedded control and low energy consumption.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How do I find detailed pinout and package drawings?
Consult the official product datasheet and the mechanical drawing section in the manufacturer documentation for exact package dimensions, pin assignments and recommended PCB land patterns.
Where are memory sizes specified?
Memory capacities such as on?chip flash and RAM are listed in the official datasheet. Refer to the memory map and electrical specifications pages for precise sizes and partitioning.
📩 Contact Us
What development tools support this device?
The MSP430 family is supported by vendor toolchains, debuggers and example libraries. Check the manufacturer’s development resources for compatible compilers, IDEs and evaluation boards.
How can I verify power consumption profiles?
Power consumption numbers, mode?dependent currents and wake timings are published in the electrical characteristics section of the datasheet. Use those curves to model system battery life under expected duty cycles.