MSP430F6726IPNR Overview
The MSP430F6726IPNR is a 16?bit ultra?low?power microcontroller in the MSP430 family. It targets embedded control where low energy and mixed?signal integration matter. The device combines a compact CPU core with on?chip analog and digital peripherals for sensor interface, timing, and communications. It suits battery?powered and industrial systems that demand long runtime, deterministic timing, and concise code density. For official ordering, documentation, and authorized supply chain details visit IC Manufacturer.
MSP430F6726IPNR Technical Specifications
| Parameter | Value |
|---|---|
| CPU architecture | 16?bit RISC core |
| Operating voltage | Refer to official datasheet for device?specific VDD range |
| Operating frequency (max) | Refer to official datasheet for maximum CPU clock |
| Memory types | On?chip nonvolatile memory and RAM (see datasheet for sizes) |
| Analog peripherals | Integrated ADC and comparator resources (datasheet lists channels and resolution) |
| Timers and PWMs | Multiple on?chip timers with capture/compare functionality |
| Communication interfaces | UART, SPI, I2C (see datasheet for module counts and speeds) |
| Package type | See part suffix for package and pin count in official documentation |
| Operating temperature | Refer to datasheet for specified industrial temperature ranges |
| Development support | Supported by MSP430 development tools and reference documentation |
MSP430F6726IPNR Key Features
- 16?bit RISC core that delivers compact code and efficient control for low?power embedded tasks.
- Mixed?signal integration with on?chip ADCs and comparators, enabling direct sensor interfacing and fewer external components.
- Multiple communications (UART/SPI/I2C), which simplifies connectivity to peripherals and reduces board complexity.
- Low?power modes that extend battery life in portable and metered applications while keeping wake latency predictable.
Typical Applications
- Battery?powered sensor nodes for industrial monitoring where long battery life and reliable analog conversion are essential for extended field operation.
- Precision metering and energy measurement systems that require low drift analog inputs and deterministic timing for accurate sampling and calculations.
- Embedded control in motor drivers and power supplies where integrated timers and PWM outputs simplify gate drive and speed control tasks.
- Human?machine interfaces and small industrial controllers that need compact code, serial communications, and integrated analog front?end for sensors and user inputs.
MSP430F6726IPNR Advantages vs Typical Alternatives
The device favors low energy consumption and tight integration compared with many 8? or 32?bit alternatives. Its 16?bit core offers better code density than many 32?bit MCUs, which can reduce flash and RAM needs. The integrated analog peripherals reduce external component count versus discrete solutions. For applications prioritizing long runtime, deterministic wake behavior, and mixed?signal capability, this device provides a balance of efficiency and system integration that often lowers system cost and board area.
🔥 Best-Selling Products
MSP430F6726IPNR Brand Info
The MSP430F6726IPNR is part of the MSP430 microcontroller family from Texas Instruments. The brand is known for low?power 16?bit MCUs and extensive development ecosystems. TI provides datasheets, reference designs and development tools to accelerate design and validation for industrial and battery?powered systems.
FAQ
What is the core architecture?
The device uses a 16?bit reduced instruction set CPU core common to the MSP430 family. This core focuses on low power and compact code density for embedded control tasks.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Where to find full electrical specs?
Full electrical characteristics, pinout, timing diagrams, and absolute maximum ratings are provided in the official datasheet and product technical documents available from the manufacturer or authorized distributors.
Which development tools support it?
MSP430 family devices are supported by TI development tools, including integrated IDEs, compilers, and hardware debug probes. Refer to the manufacturer’s toolchain documentation for supported versions and tool recommendations.
📩 Contact Us
How to verify package and pin count?
Package details, pin assignments, and mechanical drawings are published in the device datasheet and package drawing files. Confirm the part suffix for exact package style when ordering or designing PCBs.
Can this device run from batteries?
Yes. The MSP430 architecture emphasizes ultra?low?power operation and multiple low?power modes. For exact current consumption figures and recommended battery types, consult the datasheet and device electrical tables.