MCP6273T-E/CH Overview
The MCP6273T-E/CH is a precision operational amplifier designed for low-power applications. It features rail-to-rail output capability, ensuring maximum output swing and enhanced performance in a variety of electronic circuits. With a low quiescent current, this device is ideal for battery-operated systems, providing both efficiency and reliability. The MCP6273T-E/CH is suitable for applications requiring high accuracy and minimal distortion, making it a versatile choice for engineers and designers in the industrial technology sector. For more details, visit IC Manufacturer.
MCP6273T-E/CH Key Features
- Low Power Consumption: This operational amplifier operates with a low quiescent current, which extends battery life in portable devices.
- Rail-to-Rail Output: The ability to drive output to the supply rails allows for maximum signal utilization, improving overall system performance.
- High Precision: With reduced distortion and noise, the MCP6273T-E/CH provides accurate signal amplification, which is critical in sensitive applications.
- Wide Supply Voltage Range: This device supports a broad voltage range, making it adaptable for various power supply configurations.
MCP6273T-E/CH Technical Specifications
| Parameter | Value |
|---|---|
| Supply Voltage (V) | 2.7 to 6.0 |
| Quiescent Current (IQ) | 1.0 ??A (typical) |
| Output Voltage Swing | Rail-to-Rail |
| Gain Bandwidth Product | 1 MHz |
| Input Offset Voltage | 50 ??V (max) |
| Common Mode Rejection Ratio (CMRR) | 100 dB (typical) |
| Power Supply Rejection Ratio (PSRR) | 100 dB (typical) |
| Temperature Range | -40??C to +125??C |
MCP6273T-E/CH Advantages vs Typical Alternatives
Compared to typical alternatives, this operational amplifier stands out due to its low power consumption and rail-to-rail output capability. These features ensure enhanced performance in battery-operated devices, while its high precision guarantees reliable signal processing. This combination of efficiency and accuracy makes it an ideal choice in various electronic applications.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Battery-Powered Devices: The low quiescent current makes this amplifier suitable for portable applications, ensuring extended battery life without compromising performance.
- Signal Conditioning: Ideal for amplifying low-level signals in sensors and transducers, enhancing the accuracy of measurements.
- Audio Equipment: Provides clean, distortion-free audio amplification, making it perfect for high-fidelity sound systems.
- Data Acquisition Systems: The high precision and low noise characteristics are crucial in achieving accurate readings in various measurement scenarios.
MCP6273T-E/CH Brand Info
MCP6273T-E/CH is developed by a leading manufacturer known for its innovation in semiconductor technology. This operational amplifier reflects the brand’s commitment to high-quality, reliable components designed to meet the demanding needs of engineers and designers in various industries.
FAQ
What is the supply voltage range for the MCP6273T-E/CH?
The operational amplifier operates within a supply voltage range of 2.7 to 6.0 volts, making it versatile for different applications.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How does the MCP6273T-E/CH perform in low-power applications?
This device is designed with low quiescent current, typically around 1.0 ??A, making it ideal for battery-powered devices that require energy efficiency.
What is the significance of rail-to-rail output in this amplifier?
Rail-to-rail output allows the amplifier to utilize the entire supply voltage range, maximizing signal swing and improving performance in various electronic circuits.
📩 Contact Us
Can the MCP6273T-E/CH be used in high-temperature environments?
Yes, the operational amplifier operates effectively within a temperature range of -40??C to +125??C, making it suitable for demanding thermal conditions.
What applications benefit most from the MCP6273T-E/CH?
Typical applications include battery-powered devices, signal conditioning, audio equipment, and data acquisition systems, where precision and low power are critical.
