KP201XTMA1 Overview
The KP201XTMA1 is a MEMS-based air pressure sensor designed for industrial and commercial applications requiring precise atmospheric pressure measurements. Its compact surface-mount package, digital I2C interface, and factory-calibrated outputs make it an efficient choice for embedded systems. The device delivers stable and accurate pressure readings across a wide temperature range, optimizing system performance while reducing design complexity. This sensor addresses the need for high integration and low power consumption, making it ideal for portable devices, environmental monitoring, and industrial process control. For more details on similar pressure sensors, visit IC Manufacturer.
KP201XTMA1 Technical Specifications
| Parameter | Value |
|---|---|
| Sensor Type | MEMS Absolute Pressure Sensor |
| Output Interface | I2C Digital |
| Pressure Range | 300 hPa to 1100 hPa |
| Operating Voltage | 1.71V to 3.6V |
| Package Type | LGA (Land Grid Array), 8-Pin |
| Operating Temperature | -40??C to +85??C |
| Accuracy | ?I0.12 hPa (typical) |
| Current Consumption | Low Power Mode Supported |
KP201XTMA1 Key Features
- High-Precision Measurement: The device offers absolute pressure measurements with typical accuracy of ?I0.12 hPa, ensuring reliable data for altitude and environmental monitoring.
- Digital I2C Interface: Simple integration into embedded systems enables rapid development and minimizes signal loss compared to analog outputs.
- Wide Operating Range: Designed for 300 hPa to 1100 hPa and -40??C to +85??C, it??s suitable for diverse industrial and commercial environments.
- Low Power Consumption: Ideal for battery-operated and portable devices, the sensor supports low power modes to extend operational lifetime.
- Compact LGA Package: The 8-pin LGA form factor saves board space and enables dense PCB layouts for modern electronics.
- Factory-Calibrated Output: Reduces the need for manual calibration and speeds up time-to-market for end products.
KP201XTMA1 Advantages vs Typical Alternatives
The KP201XTMA1 offers precise pressure sensing with a digital I2C interface, outperforming many analog-output sensors in signal integrity and ease of system integration. Its factory calibration and low power consumption provide added reliability and efficiency for portable and embedded applications. The wide operating temperature range and compact package further enhance deployment flexibility over less integrated alternatives.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Environmental and Weather Monitoring: The sensor??s high resolution enables accurate atmospheric pressure readings for weather stations, environmental loggers, and climate research instruments in harsh or changing environments.
- Industrial Process Control: Integrates seamlessly into industrial automation systems where precise pressure data is crucial for system safety and operational efficiency.
- Portable and Wearable Devices: Its low power design and small form factor support barometric pressure sensing in consumer electronics, fitness trackers, and handheld GPS units.
- Altitude and HVAC Systems: Used to monitor altitude changes in drones, elevators, or to optimize airflow and pressure in heating, ventilation, and air conditioning equipment.
KP201XTMA1 Brand Info
The KP201XTMA1 is a product from a recognized manufacturer specializing in advanced MEMS sensor solutions. This device is part of a family of precision pressure sensors engineered to deliver stable digital outputs and robust performance in a wide variety of industrial and consumer applications. The sensor??s integration-friendly design, combined with its reliable calibration and digital communication, underscores the manufacturer??s commitment to quality, innovation, and application flexibility.
FAQ
What communication protocol does the KP201XTMA1 support?
This sensor features a digital I2C interface, which ensures easy integration with most microcontrollers and embedded processors. I2C simplifies system design by supporting multiple devices on a single bus, reducing wiring complexity and improving reliability.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
What is the pressure range for this device?
The KP201XTMA1 measures absolute pressure from 300 hPa to 1100 hPa, making it suitable for a broad spectrum of applications including weather monitoring, altitude measurement, and industrial controls where this range is required.
Is the sensor suitable for battery-powered applications?
Yes, this device is designed to operate with low current consumption and supports low power modes. This makes it ideal for portable, battery-powered systems such as wearables, handheld devices, or remote sensing stations.
📩 Contact Us
How does the KP201XTMA1 simplify system integration?
The sensor comes factory-calibrated and provides a digital output, eliminating the need for external calibration and analog-to-digital conversion. Its compact LGA package helps save valuable PCB space in densely populated designs.
In what environments can this sensor operate reliably?
With an operating temperature range from -40??C to +85??C and a robust MEMS design, the KP201XTMA1 can be deployed in harsh industrial, outdoor, or automotive environments while maintaining measurement accuracy and stability.
