IPAN60R125PFD7SXKSA1 Overview
The IPAN60R125PFD7SXKSA1 is a high-performance power MOSFET optimized for demanding industrial and commercial electronic applications. Engineered for efficient power switching, this N-channel device combines robust breakdown voltage with low on-resistance, making it ideal for advanced power management, motor drives, and power supply designs. Its compact and thermally efficient TO-220FP package streamlines integration into dense layouts. Designed for reliability and consistent operation, this MOSFET delivers trusted performance in high-stress environments. For more details, visit IC Manufacturer.
IPAN60R125PFD7SXKSA1 Technical Specifications
| Parameter | Value |
|---|---|
| Product Category | MOSFETs – Single |
| Transistor Polarity | N-Channel |
| Drain-Source Voltage (Vds) | 600 V |
| Continuous Drain Current (Id) | 12.2 A |
| On-Resistance (Rds(on)) | 125 mOhm |
| Package/Case | TO-220FP |
| Number of Pins | 3 |
| Mounting Type | Through Hole |
| Operating Temperature Range | -55??C to +150??C |
IPAN60R125PFD7SXKSA1 Key Features
- High voltage tolerance up to 600 V, enabling safe and efficient operation in high-voltage circuits for industrial and power supply applications.
- Low on-resistance of 125 mOhm significantly reduces conduction losses, enhancing overall system efficiency and minimizing heat generation.
- Robust continuous drain current capability (12.2 A) supports higher load requirements and increases design flexibility for demanding power switching tasks.
- TO-220FP package offers excellent thermal performance and electrical insulation, simplifying thermal management and ensuring reliable operation in compact designs.
IPAN60R125PFD7SXKSA1 Advantages vs Typical Alternatives
Compared to typical alternatives, this device delivers superior power efficiency due to its low on-resistance and high breakdown voltage. Its TO-220FP package also stands out for enhanced electrical insulation and simplified heatsinking. These characteristics contribute to more reliable performance and easier integration into high-voltage, high-current environments, reducing design complexity and increasing operational safety.
🔥 Best-Selling Products
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Switch-mode power supplies (SMPS): Ideal for primary-side switching in high-voltage SMPS, improving conversion efficiency and providing robust voltage handling for industrial and commercial power designs.
- Motor drives: Suitable for inverter stages in AC or DC motor control systems, supporting precise power modulation and efficient load management.
- Power factor correction (PFC) circuits: Enhances the efficiency and stability of PFC stages in large-scale power management systems.
- General-purpose high-voltage switching: Reliable choice for use in relay replacements, solenoid drivers, and other applications requiring fast, efficient high-voltage switching.
IPAN60R125PFD7SXKSA1 Brand Info
The IPAN60R125PFD7SXKSA1 is a member of a widely recognized MOSFET product family, known for delivering precise, efficient, and reliable power switching solutions. This device is engineered to meet the requirements of modern industrial and commercial electronics, with a focus on robust voltage handling and low-loss performance. Its package and electrical characteristics cater to engineers seeking a balance of safety, efficiency, and ease of integration in their high-voltage power designs.
FAQ
What makes the IPAN60R125PFD7SXKSA1 suitable for high-voltage applications?
The 600 V drain-source voltage rating allows this MOSFET to handle high-voltage conditions commonly found in industrial power supplies and motor drives. Its robust design helps maintain safety and reliability even under stressful operating scenarios.
🌟 Featured Products
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How does the low on-resistance benefit my design?
The low Rds(on) value of 125 mOhm reduces conduction losses during operation, which not only improves system efficiency but also minimizes heat buildup. This leads to potentially smaller heatsinks and lower overall system costs.
What type of package does this MOSFET use and why is it important?
The TO-220FP package combines good thermal characteristics with electrical insulation, making it easier to manage heat dissipation and enhance operational safety in compact or densely populated circuit boards.
📩 Contact Us
Is this MOSFET suitable for switching applications in motor control?
Yes, with its high current capability and fast switching characteristics, this device is an excellent choice for inverter and drive stages in both AC and DC motor control systems, supporting efficient and precise power delivery.
What are the key considerations when mounting this device?
The through-hole mounting style ensures secure placement and reliable electrical contact. Proper thermal management is recommended to fully leverage the device??s current handling capability, especially in applications with continuous high loads.
