F280039CSPM Overview
The F280039CSPM is a real-time microcontroller module optimized for industrial motor control and power conversion. It combines a deterministic 32-bit control core, integrated analog interfaces, and multiple deterministic PWM and communication peripherals to deliver faster closed-loop response than many general-purpose MCUs. Designers get tighter control loops, lower latency interrupts, and denser integration for compact power electronics. For procurement and technical resources visit IC Manufacturer.
F280039CSPM Technical Specifications
| Attribute | Value |
|---|---|
| CPU Core | 32-bit C28x control core @ 100 MHz |
| Flash Memory | 256 KB on-chip Flash |
| SRAM | 100 KB on-chip RAM |
| ADC | 12-bit SAR, 16 input channels |
| PWM Outputs | Up to 12 PWM channels, 3 PWM modules |
| Timers | 3 high-resolution timers |
| Communications | CAN 2.0B, SPI, I2C, UART |
| Operating Voltage | 3.3 V supply |
| Package | SPM module |
| Operating Temperature | -40 ??C to +85 ??C industrial |
F280039CSPM Key Features
- Deterministic C28x core: Enables faster control loop execution and lower jitter compared with many general-purpose microcontrollers.
- High-resolution PWM: Multiple PWM channels provide precise phase and duty control, reducing torque ripple in motor drives and improving converter efficiency.
- Integrated 12-bit ADC: Directly samples multiple analog channels for tighter closed-loop control and fewer external components.
- Multiple comms ports: CAN, SPI, I2C, and UART support easier integration with sensors, gate drivers, and supervisory controllers for reliable system networking.
Typical Applications
- Industrial motor drives where fast torque control and low latency are required, such as servo drives and variable-frequency drives with strict real-time demands.
- Power conversion and renewable energy inverters that need precise PWM resolution and multiple ADC channels for current and voltage sensing.
- Embedded motion control systems that demand compact integration of control core, analog front-end, and communications to reduce board area and BOM count.
- Automated industrial equipment which requires robust CAN connectivity, deterministic timing, and operation across industrial temperature ranges.
F280039CSPM Advantages vs Typical Alternatives
The module focuses on real-time control and integration. Compared with general-purpose MCUs, it offers higher deterministic performance from a dedicated control core and more native PWM and ADC resources. Versus discrete component solutions, it reduces component count and board area by combining memory, analog, and communications on one module. This yields faster design cycles, fewer points of failure, and better repeatability in control loop timing.
🔥 Best-Selling Products
F280039CSPM Brand Info
The part is produced under the Texas Instruments C2000 family branding, focused on real-time control solutions. The brand emphasizes deterministic performance, extensive peripheral integration, and broad toolchain support for rapid development and reliable deployment in industrial and motor-control markets.
FAQ
What core does it use?
The device uses a 32-bit C28x control core optimized for deterministic interrupt and real-time task execution, enabling tighter control loops and predictable latency for motor and power applications.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How many ADC channels are available?
It provides a 12-bit SAR ADC with multiple input channels, allowing simultaneous or sequenced sampling of several analog signals for current and voltage monitoring in power systems.
Which communications interfaces are supported?
The module supports CAN 2.0B for field networking plus SPI, I2C, and UART interfaces to connect sensors, gate drivers, and higher-level controllers commonly used in industrial designs.
📩 Contact Us
Is it suitable for industrial temperature ranges?
Yes, the part is specified for industrial operation and is rated to operate across a wide temperature range suitable for factory and outdoor equipment.
What advantages for motor control designs?
Engineers gain higher PWM resolution, integrated ADCs for faster sensing, and a deterministic core to reduce latency. The result is improved torque control, lower noise, and more compact system designs.