F2800137PMR Overview
The F2800137PMR is a 32?bit microcontroller built for real?time control in industrial systems. It combines a single C28x CPU core with integrated analog and motor?control peripherals to deliver lower latency and faster control loops compared with older 16?bit controllers. Onboard resources include flash memory, SRAM, high?resolution PWM, and a multi?channel 12?bit ADC, making it suitable for precise power conversion and motor drive designs. Source, ordering, and technical support are available through IC Manufacturer.
F2800137PMR Technical Specifications
| CPU core | 32?bit C28x |
| Maximum clock | 60 MHz |
| Flash memory | 128 KB |
| SRAM | 20 KB |
| ADC | 12?bit, 16 channels |
| PWM channels | 6 channels with high resolution |
| Communication | SPI ??2, I2C ??1, UART/SCI ??2, CAN ??1 |
| Operating voltage | 3.0?C3.6 V (typical 3.3 V) |
| Operating temperature | ?40 ??C to +85 ??C |
| Package | 32?pin QFN (tape & reel) |
| Typical power consumption | Low?power modes supported, active core current in mA range |
F2800137PMR Key Features
- High?performance 32?bit CPU ?? Executes control algorithms faster than many 16?bit parts, reducing loop latency and improving response for closed?loop control.
- Multi?channel 12?bit ADC ?? Provides finer measurement resolution for voltage and current sensing, which matters for accurate motor torque and power monitoring.
- High?resolution PWM ?? Enables precise waveform generation for motor drives and power converters, improving efficiency and reducing audible noise.
- Integrated communications ?? SPI, I2C, UART/SCI, and CAN interfaces simplify system integration across sensors, gate drivers, and supervisory controllers.
- Onboard flash and SRAM ?? Offers space for firmware and real?time buffers, enabling compact system designs with fewer external memory components.
- Industrial temperature range ?? Supports deployment in harsher environments where room?temperature parts fall short, increasing reliability across applications.
Typical Applications
- Motor drives for industrial pumps and fans where precise torque control, reduced latency, and higher PWM resolution improve efficiency and reduce mechanical stress over time.
- Three?phase inverter control in renewable energy inverters where accurate ADC sampling and tight PWM timing increase conversion efficiency and lower harmonics.
- Power?supply digital control in telecom and data center power modules where deterministic response and integrated communication interfaces streamline monitoring and redundancy.
- Embedded motor controllers in robotics and automation where a compact MCU with integrated peripherals reduces board area and simplifies EMI management for dense system layouts.
F2800137PMR Advantages vs Typical Alternatives
The device offers a higher bit?width CPU and finer analog resolution compared with many legacy 16?bit microcontrollers, yielding faster control loops and improved sensing accuracy. With integrated high?resolution PWM and multiple comms interfaces, it reduces the need for external timing or converter ICs. The industrial temperature rating and on?chip flash/SRAM also provide a more complete system solution than alternatives that require external memory or cooling, lowering BOM count and simplifying supply chains.
🔥 Best-Selling Products
F2800137PMR Brand Info
F2800137PMR is offered by Texas Instruments, a leading semiconductor supplier for industrial and embedded control. TI provides comprehensive documentation, development tools, and long?term availability for its C2000 family to support design cycles and production sourcing in power and motor control markets.
FAQ
What core and performance level does it provide?
The part uses a 32?bit C28x core designed for real?time control. Clocked in the tens of megahertz range, it supports tighter control loops and faster interrupt service routines than common 16?bit MCUs.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How many ADC channels are available?
It integrates a multi?channel 12?bit ADC. This allows simultaneous or rapid sequential sampling of several phase currents or voltages, improving measurement fidelity in multi?sensor systems.
Which motor control peripherals are included?
Onboard peripherals include high?resolution PWM channels, capture/compare modules, and encoder interfaces. These blocks are tuned for robust motor control and power conversion topologies.
📩 Contact Us
What communications interfaces are supported?
The device includes industry standard interfaces such as SPI, I2C, UART/SCI, and CAN. These support sensor fusion, telemetry, and networked control in industrial and automotive environments.
Is the package and temperature range suitable for industrial use?
Yes. The part is supplied in a compact QFN tape?and?reel package and rated across a wide temperature span suited for industrial deployment, helping maintain reliability in elevated or low?temperature conditions.