BTS6201UJ Overview
The BTS6201UJ is a high-performance smart high-side power switch designed for automotive and industrial applications requiring efficient load management and protection. Integrating advanced diagnostics, overcurrent protection, and thermal shutdown, this device ensures reliable operation in harsh environments. Its compact package and low on-resistance contribute to reduced power loss and enhanced energy efficiency. Designed by IC Manufacturer, the BTS6201UJ offers a robust solution for controlling resistive and inductive loads, making it ideal for modern electronic control units and embedded systems.
BTS6201UJ Technical Specifications
| Parameter | Specification |
|---|---|
| Supply Voltage (VCC) | 4.5 V to 28 V |
| Continuous Load Current (ILOAD) | 1.5 A |
| On-Resistance (RDS(on)) | Typically 70 m?? at 25??C |
| Overcurrent Detection Threshold | Typical 2.8 A |
| Operating Temperature Range | -40??C to +150??C |
| Standby Current | Typically 5 ??A |
| Diagnostic Output | Open-drain with overtemperature, overcurrent indication |
| Package Type | PowerSO-12 (12-pin) |
BTS6201UJ Key Features
- Integrated Smart High-Side Switch: Enables precise load control with built-in protections, reducing external component count and simplifying system design.
- Overcurrent and Overtemperature Protection: Automatically limits current and shuts down on overheating to safeguard both the switch and connected loads, enhancing system reliability.
- Low On-Resistance: Minimizes power dissipation, improving energy efficiency and reducing heat generation during operation.
- Diagnostic Feedback: Provides real-time status signals for fault detection and system monitoring, supporting predictive maintenance and reducing downtime.
BTS6201UJ Advantages vs Typical Alternatives
This device offers superior integration of protection and diagnostic features compared to standard discrete switches. Its low on-resistance and wide operating voltage range improve efficiency and compatibility with diverse systems. The built-in overcurrent and thermal shutdown mechanisms provide enhanced reliability, reducing the need for additional protection circuitry. These advantages ensure safer operation and simplified design in demanding automotive and industrial environments.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Automotive load management systems, such as controlling lamps, valves, and solenoids, where robust protection and diagnostics are critical for safety and reliability.
- Industrial automation systems requiring precise and protected switching of resistive and inductive loads under varying electrical conditions.
- Embedded control units that benefit from integrated diagnostic signals to monitor device status and prevent system failures.
- Battery management and power distribution modules where efficient load switching and protection extend device and system longevity.
BTS6201UJ Brand Info
The BTS6201UJ is part of a family of smart high-side switches designed and manufactured by a leading semiconductor supplier specializing in automotive and industrial electronics. This product line emphasizes integration, reliability, and efficiency, combining power MOSFET technology with intelligent control and diagnostic functions. The BTS6201UJ exemplifies the brand??s commitment to delivering robust, high-quality components that meet stringent automotive standards and industrial demands.
FAQ
What type of loads can the BTS6201UJ control?
The device is suitable for switching both resistive and inductive loads, including lamps, solenoids, and small motors. Its integrated protection features ensure safe operation even under transient or overload conditions typical in automotive and industrial environments.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How does the BTS6201UJ protect against overcurrent events?
It incorporates an internal current limitation circuit that activates when the load current exceeds a predefined threshold, typically around 2.8 A. If the overcurrent persists, the device enters thermal shutdown to prevent damage, automatically resetting once safe operating conditions are restored.
Can the BTS6201UJ provide diagnostic feedback to a microcontroller?
Yes, the device offers an open-drain diagnostic output that signals fault conditions such as overtemperature or overcurrent events. This output allows system-level monitoring and facilitates timely maintenance or fault handling.
📩 Contact Us
What are the temperature operating limits of this high-side switch?
The device operates reliably over a wide temperature range from -40??C up to +150??C, making it suitable for harsh automotive and industrial applications where temperature extremes are common.
Which package type is used for the BTS6201UJ, and how does it benefit system integration?
This component is supplied in a compact PowerSO-12 package, which supports efficient thermal dissipation and simplifies PCB layout. Its small footprint aids in space-constrained designs while maintaining robust electrical and mechanical performance.
