ATR4258-ILSH 19 Overview
The ATR4258-ILSH 19 is a high-performance integrated circuit designed for precise electronic applications. Featuring a dual operational amplifier configuration with low noise and offset voltage, it optimizes signal integrity in complex systems. Its low power consumption and wide supply voltage range make it suitable for industrial and instrumentation environments. With a robust design that supports stable operation across temperature variations, the device offers reliable performance for engineers requiring consistent analog signal processing. For detailed technical support and product availability, visit IC Manufacturer.
ATR4258-ILSH 19 Technical Specifications
| Parameter | Specification |
|---|---|
| Supply Voltage Range | ??3 V to ??18 V |
| Input Offset Voltage | Max 0.8 mV |
| Input Bias Current | Max 1.5 nA |
| Input Noise Voltage | 12 nV/??Hz at 1 kHz |
| Gain Bandwidth Product | 4 MHz |
| Slew Rate | 2.6 V/??s |
| Output Current | ??25 mA |
| Operating Temperature Range | -40??C to +85??C |
| Package Type | SOIC-8 |
ATR4258-ILSH 19 Key Features
- Dual Operational Amplifier Architecture: Enables compact circuit design by integrating two amplifiers in a single package, reducing board space and simplifying system layouts.
- Low Input Offset Voltage: Minimizes signal distortion and enhances measurement accuracy, critical for precision instrumentation and sensor interfaces.
- Wide Supply Voltage Range: Supports operation from ??3 V up to ??18 V, providing flexibility in different power environments and improving compatibility with varied industrial power rails.
- Low Input Bias Current: Ensures minimal loading on high-impedance signal sources, preserving signal integrity in sensitive analog front-end applications.
ATR4258-ILSH 19 Advantages vs Typical Alternatives
This device offers distinct advantages over typical operational amplifiers with its combination of low noise, low offset voltage, and a broad supply voltage range. These features contribute to enhanced accuracy and reliability in demanding industrial and instrumentation settings. Additionally, its dual amplifier configuration and low input bias current reduce system complexity and power consumption, providing engineers with a versatile and efficient solution.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Precision Sensor Signal Conditioning: Ideal for amplifying low-level analog signals in industrial measurement systems where accuracy and noise performance are crucial.
- Industrial Automation Control Circuits: Suitable for use in control loops requiring reliable analog processing with minimal offset error.
- Data Acquisition Systems: Supports high-fidelity signal amplification in multi-channel acquisition platforms.
- Medical Instrumentation: Applicable in medical devices that demand stable and precise analog amplification under varying environmental conditions.
ATR4258-ILSH 19 Brand Info
The ATR4258-ILSH 19 is part of a series of precision operational amplifiers offered by a leading semiconductor manufacturer known for quality and reliability in industrial-grade integrated circuits. Designed to meet rigorous performance standards, this product is engineered to deliver consistent results in professional instrumentation and control applications. The brand emphasizes robust design, long-term availability, and comprehensive technical support to assist engineers and sourcing specialists throughout the product lifecycle.
FAQ
What is the typical supply voltage range supported by this amplifier?
The device operates within a supply voltage range from ??3 V to ??18 V, allowing flexibility for integration into various power supply configurations commonly found in industrial and instrumentation environments.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How does the input offset voltage affect signal accuracy?
Low input offset voltage, capped at 0.8 mV, reduces the inherent error in the amplifier??s output when no input signal is present. This contributes to more accurate signal amplification, which is essential for precise measurements and sensor interfacing.
Can this amplifier be used in high-frequency applications?
With a gain bandwidth product of 4 MHz and a slew rate of 2.6 V/??s, the device is suitable for moderate-frequency analog signal processing tasks but may not be optimal for very high-frequency applications beyond this range.
📩 Contact Us
What are the temperature limits for reliable operation?
The product is rated for operation within a temperature range of -40??C to +85??C, ensuring stable performance in harsh industrial and outdoor environments where temperature fluctuations are common.
What packaging options are available for this product?
This device is supplied in a SOIC-8 package, which supports easy integration into standard PCB layouts and provides a balance of compact size and heat dissipation suitable for industrial applications.
