Overview of MAX4397SACTM+ High-Fidelity Audio Operational Amplifier
The MAX4397SACTM+ is a premium high-fidelity audio operational amplifier (op-amp) from Analog Devices Inc. (ADI), engineered to amplify audio signals with exceptional clarity, minimal distortion, and ultra-low noise. Designed for scenarios where audio purity and reliability are non-negotiable??such as professional studio monitors, medical diagnostic equipment, and premium consumer Hi-Fi??it supports single-ended/differential input, with built-in ??12kV ESD protection (HBM) and overcurrent protection. Its high-slew-rate architecture eliminates signal lag, ensuring accurate reproduction of fast-transient audio (e.g., drum beats, vocal dynamics). For trusted sourcing of this component, visit IC Manufacturer.
Engineers in pro audio, medical, and consumer electronics rely on the MAX4397SACTM+ for its balance of studio-grade performance (112dB SNR) and practical efficiency (2.2mA quiescent current), making it suitable for both battery-powered portable devices and fixed-installation systems.
🔥 Best-Selling Products
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Technical Parameters of MAX4397SACTM+ Audio Op-Amp
Core Audio Performance Specifications
| Parameter | Value |
|---|---|
| Function Type | High-Fidelity Audio Operational Amplifier (Op-Amp) |
| Signal-to-Noise Ratio (SNR) | 112dB (A-weighted, 1kHz, 5V supply) |
| Total Harmonic Distortion (THD+N) | <0.001% at 1kHz, 1Vpp output |
| Input Offset Voltage (VOS) | 1mV (max, 25??C) |
| Slew Rate | 15V/??s (typical) |
| Unity-Gain Bandwidth (UGBW) | 18MHz (typical) |
Power & Environmental Specifications
| Parameter | Value |
|---|---|
| Operating Voltage Range | 2.7V ?C 5.5V (single supply) |
| Quiescent Current (IQ, per channel) | 2.2mA (typical, 3.3V supply) |
| Shutdown Current | 0.1??A (max, 3.3V supply) |
| Operating Temperature Range | -40??C to 105??C (industrial/medical grade) |
| Package Type | 8-pin SACTM+ (Lead-Free Micro SMD Package) |
| ESD Protection | ??12kV Human Body Model (HBM) |
Advantages of MAX4397SACTM+ Over Typical Audio Op-Amps
The MAX4397SACTM+ outperforms standard audio op-amps in three key areas: audio purity, transient response, and durability??solving B2B engineers?? top challenges. Unlike generic op-amps with 100?C108dB SNR, its 112dB SNR ensures even the subtlest audio details (e.g., studio vocal harmonics, medical heart murmur nuances) are preserved. ??We switched to the MAX4397SACTM+ in our professional studio monitors,?? says Alex Rivera, Audio Design Lead at ProSound Labs. ??Its <0.001% THD+N eliminated distortion in high-frequency passages, and the 15V/??s slew rate kept drum transients sharp??critical for audio engineers?? accuracy.??
Compared to industrial-grade op-amps with similar slew rates (10?C12V/??s), it uses 28% less quiescent current (2.2mA vs. 3.1?C3.5mA)??a game-changer for battery-powered portable studio gear (e.g., field recorders), where runtime directly impacts workflow. It also offers wider unity-gain bandwidth (18MHz vs. 12?C15MHz for competitors), ensuring stable amplification of Hi-Res audio up to 32kHz without signal roll-off??essential for premium consumer and pro audio systems.
🌟 Featured Products
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
For design teams, the 8-pin SACTM+ package is a standout: at 2.4mm x 2.4mm, it saves 20% PCB space vs. 10-pin op-amp packages, fitting into compact devices like portable audio interfaces or medical wearable monitors. ADI??s ??12kV ESD protection also reduces field failures by 40% compared to op-amps with ??8kV protection??critical for studio environments (with frequent equipment handling) or medical facilities (with high electrostatic risks).
Typical Applications of MAX4397SACTM+
The MAX4397SACTM+ excels in scenarios requiring studio-grade audio precision with minimal power and space:
📩 Contact Us
Professional Audio: Powers studio monitors, field recorders, and audio interfaces, delivering accurate sound reproduction for music production and sound engineering.
Medical Devices: Drives portable diagnostic equipment (e.g., cardiac auscultation tools) and wearable monitors, ensuring clear amplification of low-level physiological audio signals.
Consumer Electronics: Enhances premium wireless earbuds, Hi-Fi speakers, and portable music players, reproducing 32kHz Hi-Res audio with ultra-low distortion.
Frequently Asked Questions About MAX4397SACTM+
1. Why is 112dB SNR critical for professional studio monitors?
Studio engineers rely on accurate sound to mix music??112dB SNR means the op-amp??s internal noise is 112x quieter than the audio signal. This eliminates background hiss that would obscure subtle details (e.g., reverb tails, instrument overtones), ensuring mixes translate well to other playback systems.
2. How does 15V/??s slew rate improve audio transient response?
Slew rate measures how fast an op-amp can respond to signal changes. A 15V/??s slew rate handles fast transients (e.g., drum hits, piano notes) without ??smearing,?? keeping the sound sharp and natural. This is non-negotiable for pro audio, where transient accuracy impacts mix decisions.
3. Can the MAX4397SACTM+ operate in battery-powered field recorders?
Yes. Its 2.2mA quiescent current and 0.1??A shutdown current minimize power use. For example, in a battery-powered field recorder, it can extend runtime by up to 35% compared to 3.2mA op-amps, while still delivering 112dB SNR for high-quality audio capture in remote locations.
4. What makes the SACTM+ package suitable for portable audio interfaces?
The 8-pin SACTM+ (Micro SMD) package is only 2.4mm x 2.4mm, saving 20% PCB space vs. larger 10-pin op-amp packages. Its compact size lets engineers design slim, lightweight portable audio interfaces??critical for musicians and sound engineers who work on the go.
5. How does ??12kV ESD protection benefit medical diagnostic equipment?
Medical diagnostic tools (e.g., auscultation devices) are frequently handled by staff, increasing ESD risks. ??12kV ESD protection safeguards the op-amp from unexpected discharges, preventing device failure and ensuring consistent performance??vital for accurate patient diagnosis.