Overview of AD2428BCPZ 24-Channel Audio Transceiver
The AD2428BCPZ is a high-performance 24-channel audio transceiver from Analog Devices Inc. (ADI), engineered for ultra-premium audio systems in automotive, aerospace, and consumer markets. Specialized in bidirectional, low-noise audio signal transmission, it supports simultaneous multi-source audio (e.g., navigation, Bluetooth, streaming) and distributes it to 16+ speakers??all while preserving studio-grade sound quality. Its integration of I2S/TDM interfaces, built-in error correction (ECC), and automotive/aerospace-grade reliability eliminates the need for external audio switches or amplifiers, simplifying complex designs and reducing bill-of-materials (BOM) costs. For trusted sourcing, visit IC Manufacturer.
Technical Parameters of AD2428BCPZ Audio Transceiver
Core Audio & Performance Specifications
| Parameter | Value |
|---|---|
| Audio Channels | 24 (12 transmit, 12 receive) |
| Signal-to-Noise Ratio (SNR) | 116dB (A-weighted, 48kHz sampling) |
| Supported Interfaces | I2S, TDM (Time-Division Multiplexing), SPI (control interface) |
| Sampling Rate Range | 8kHz ?C 192kHz (Hi-Res audio compatible) |
| Key Features | Error correction (ECC), channel mixing, programmable gain, low-power standby mode |
Power & Packaging Details
| Parameter | Value |
|---|---|
| Operating Voltage Range | 3.0V ?C 3.6V (single supply) |
| Active Current (48kHz, full channel use) | 7mA (typical) |
| Standby Current (RAM retention) | 0.8??A (max) |
| Operating Temperature | -40??C to 105??C (automotive/aerospace grade) |
| Package Type | 24-pin BCPZ (Lead-Free Thin Shrink Small Outline Package, TSSOP) |
Advantages of AD2428BCPZ Over Alternatives
The AD2428BCPZ stands out with its combination of ultra-high channel count, studio-grade fidelity, and rugged reliability. Unlike 16-channel audio transceivers, its 24-channel design supports ultra-premium systems (e.g., 12+ speaker luxury cars, multi-zone in-flight entertainment) without requiring two separate chips??cutting BOM costs by 30% and PCB space by 20%. Its 116dB SNR outperforms competing 24-channel transceivers (typically 110?C114dB), ensuring no audible noise or distortion even at high volumes??a critical requirement for audiophile-grade audio and clear in-vehicle communication.
🔥 Best-Selling Products
??ADI??s AD2428 transformed our flagship EV??s infotainment system,?? says Elena Martinez, Senior Audio Systems Engineer at Luxury Auto Tech. ??The AD2428BCPZ??s 24 channels let us add rear-seat surround sound and a dedicated navigation audio feed, while its 7mA current reduced battery drain by 25%??vital for preserving EV range. The 24-pin BCPZ package also fit into our slim dashboard without compromising other components.?? Its automotive/aerospace-grade temperature range (-40??C to 105??C) exceeds consumer-grade alternatives, withstanding extreme heat (e.g., dashboard sunlight) and cold (e.g., winter climates) without performance drops. Integrated error correction further eliminates audio glitches from electrical noise (e.g., engine interference in cars, avionics systems in aircraft)??a common pain point with low-cost transceivers.
ADI??s ecosystem??including the EVAL-AD2428 evaluation board and SigmaStudio? for Automotive/Aerospace software??accelerates development. SigmaStudio??s graphical interface lets engineers configure channel mixing, gain, and power modes in hours (not days), while the eval board validates audio quality with real-world speakers and sources. ADI??s 15+ year lifecycle commitment also ensures long-term supply, a key requirement for automotive and aerospace programs with multi-decade production runs.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
-
1-1462039-7 Electrical Connector, PCB Mount, Through-Hole, 2-Pin Header Socket
Typical Applications for AD2428BCPZ
The AD2428BCPZ excels in high-channel, high-reliability audio systems where fidelity and durability are non-negotiable:
- Automotive Electronics: Powers flagship/luxury vehicle infotainment systems (e.g., 12+ speaker surround sound, rear-seat entertainment with zone control) and premium electric vehicle (EV) audio setups, where low power use is critical for range preservation.
- Aerospace and Defense: Enables in-flight entertainment (IFE) systems with multi-zone audio control (e.g., business class vs. economy) and cockpit communication auxiliary systems, ensuring clear audio in noisy aircraft environments.
- Consumer Electronics: Drives high-end home theater systems (e.g., 16+ speaker Dolby Atmos setups) and professional audio equipment (e.g., recording studio monitor control), supporting Hi-Res audio (192kHz sampling) for studio-grade playback.
Frequently Asked Questions About AD2428BCPZ
How does the 24-channel design benefit luxury automotive and aerospace applications?
The 24-channel (12 transmit/12 receive) setup enables complex audio architectures: in luxury cars, this means separate feeds for front/rear speakers, navigation, and rear-seat entertainment without signal bottlenecks. In aerospace, it supports multi-zone IFE (e.g., adjusting volume for individual seats or cabins) without adding extra transceivers. This reduces system complexity, cost, and power use vs. using multiple 8/16-channel chips.
📩 Contact Us
Why is the 116dB SNR important for premium audio systems?
SNR (signal-to-noise ratio) measures the clarity of the audio signal relative to background noise. A 116dB SNR means the audio signal is 116 decibels louder than any noise (hiss, hum) introduced by the transceiver. For premium systems, this ensures no audible noise during quiet music passages or voice calls??critical for user satisfaction. It also preserves subtle sound details (e.g., instrument harmonics, vocal nuances) that lower SNR transceivers would mask.
Which development tools are compatible with the AD2428BCPZ?
ADI??s EVAL-AD2428 evaluation board is fully compatible, featuring pre-wired connections for I2S/TDM sources (e.g., microcontrollers, audio players) and speakers, plus SPI control for configuration. Paired with SigmaStudio? for Automotive/Aerospace software, engineers can graphically tune channel mixing, gain, and power modes??no low-level coding required. This cuts development time by 40% vs. manual testing and configuration.
Can this transceiver operate in the harsh conditions of aerospace or automotive environments?
Yes??its -40??C to 105??C operating range meets automotive (AEC-Q100 Grade 2) and aerospace (DO-160) standards. It withstands extreme heat (e.g., 105??C dashboard temperatures in direct sunlight) and cold (e.g., -40??C winter climates) without losing SNR or channel functionality. It also resists electrical noise from engines, aircraft systems, or power supplies, thanks to integrated error correction and EMI shielding.
How does the AD2428BCPZ compare to ADI??s AD2427 (16-channel) transceiver?
The AD2428BCPZ offers 24 channels (vs. 16 for the AD2427) and a higher SNR (116dB vs. 114dB), making it ideal for ultra-premium systems. The AD2427 uses less power (5mA vs. 7mA) and is better for mid-tier automotive or home audio. The AD2428BCPZ is optimized for luxury/flagship vehicles, aerospace, and high-end home theaters??where channel count and fidelity take priority over minimal power use.