Overview
The AD9510BCPZ is a high-performance clock generator designed to provide precise timing signals for various applications. Manufactured by IC Manufacturer, this device offers multiple output frequencies with low phase noise and jitter, ensuring accurate signal distribution. Its flexible configuration and robust design make it ideal for use in complex systems, including data communication and high-speed processing environments.
Key Features
- Multiple output frequencies: The AD9510BCPZ supports a range of output frequencies, enabling designers to customize clock signals for specific application requirements.
- Low phase noise: The device features low phase noise characteristics, which significantly enhances the performance of high-speed communication systems.
- High reliability: With a robust design built for industrial applications, it ensures long-term reliability in demanding environments.
- Flexible configuration: The device allows for easy configuration, making it suitable for various applications without extensive design changes.
AD9510BCPZ Technical Specifications
| Parameter | Value |
|---|---|
| Output Frequency Range | 1 MHz to 1 GHz |
| Phase Noise | -130 dBc/Hz at 1 MHz offset |
| Jitter | Less than 100 fs RMS |
| Supply Voltage | 3.3V |
| Operating Temperature Range | -40??C to +85??C |
| Package Type | 64-lead LFCSP |
| Output Configuration | LVPECL, LVDS, CMOS |
| Power Consumption | 150 mW |
AD9510BCPZ Advantages vs Typical Alternatives
The AD9510BCPZ stands out against typical alternatives due to its superior phase noise performance and low jitter characteristics. This results in enhanced signal integrity and reliability, making it an excellent choice for applications requiring high precision and accuracy. Additionally, its flexible output configuration supports various signaling standards.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Telecommunications: Ideal for clock generation in high-speed data networks, ensuring reliable signal timing and reduced jitter for improved data integrity.
- Industrial Automation: Provides accurate timing signals for synchronization in complex automation systems.
- Test and Measurement: Used in high-performance test equipment to generate precise reference clocks for accurate measurements.
- Consumer Electronics: Ensures optimal performance in devices requiring accurate timing, such as high-definition video and audio systems.
AD9510BCPZ Brand Info
The AD9510BCPZ is a product from a leading manufacturer known for its commitment to delivering high-quality components for electronic applications. This device exemplifies the brand’s dedication to innovation and reliability in the semiconductor industry, providing engineers with the tools they need for cutting-edge design and implementation.
FAQ
What types of outputs does the AD9510BCPZ support?
The AD9510BCPZ supports multiple output configurations, including LVPECL, LVDS, and CMOS, allowing compatibility with a wide range of digital systems and signaling standards.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
What is the maximum output frequency of the AD9510BCPZ?
This device can generate output frequencies up to 1 GHz, making it suitable for high-speed applications that require precise clock signals.
What is the temperature range for the AD9510BCPZ?
The AD9510BCPZ operates effectively within a temperature range of -40??C to +85??C, ensuring reliable performance in various environmental conditions.
📩 Contact Us
How much power does the AD9510BCPZ consume?
The device has a typical power consumption of 150 mW, which is efficient for its performance capabilities, supporting low-power designs.
Can the AD9510BCPZ be used in industrial applications?
Yes, the AD9510BCPZ is designed for industrial applications, featuring a robust design that ensures long-term reliability even in demanding environments.