A3I25D080GNR1 Overview
The A3I25D080GNR1 is a high-performance industrial-grade semiconductor device designed for reliable data storage and fast access in embedded systems. It offers robust endurance, low power consumption, and a compact form factor, making it suitable for demanding environments where consistent operation is critical. This product supports advanced memory management features and is engineered to ensure data integrity and longevity. With optimized interface compatibility and stable operation across a wide temperature range, it meets the stringent requirements of modern industrial applications. Available exclusively from IC Manufacturer, it represents a dependable choice for engineers and sourcing specialists seeking efficient memory solutions.
A3I25D080GNR1 Technical Specifications
| Parameter | Specification |
|---|---|
| Memory Type | Serial NAND Flash |
| Density | 8 Gb (Gigabit) |
| Interface | SPI Quad I/O |
| Operating Voltage | 2.7 V to 3.6 V |
| Maximum Clock Frequency | 104 MHz |
| Operating Temperature Range | -40??C to +85??C |
| Program/Erase Cycles | Up to 100,000 cycles |
| Data Retention | Up to 20 years |
| Package Type | 8-lead WSON (5mm x 6mm) |
A3I25D080GNR1 Key Features
- Quad SPI Interface: Enables high-speed data transfer rates up to 104 MHz, significantly improving system throughput and reducing latency.
- High Endurance: Supports up to 100,000 program/erase cycles, ensuring long-term reliability in industrial applications where frequent data updates are required.
- Wide Operating Temperature: Operates reliably from -40??C to +85??C, suitable for harsh environments and outdoor use cases.
- Low Power Consumption: Designed for energy-efficient operation, minimizing power draw during read, program, and standby modes, which is critical for battery-powered industrial devices.
A3I25D080GNR1 Advantages vs Typical Alternatives
This device offers a superior combination of endurance, speed, and industrial-grade temperature tolerance compared to typical NAND flash alternatives. Its quad SPI interface enhances data throughput, while the extended program/erase cycle life increases system reliability. The low voltage operation reduces power consumption without sacrificing performance, making it ideal for embedded systems requiring both efficiency and robustness.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
Typical Applications
- Embedded industrial control systems requiring reliable non-volatile memory with fast access and long lifecycle support in harsh operating conditions.
- Data logging devices that benefit from high endurance and data retention for critical information storage over extended periods.
- Networking equipment that demands rapid firmware updates and stable memory performance in wide temperature ranges.
- IoT gateways and edge devices where low power consumption and compact form factor are essential to optimize system design.
A3I25D080GNR1 Brand Info
Manufactured by a leading provider in the semiconductor industry, this memory product exemplifies the brand??s commitment to quality and innovation in industrial memory solutions. The device follows stringent quality controls and testing procedures to meet industrial standards, ensuring dependable performance in demanding applications. With a focus on integrating advanced memory technologies, this product line supports engineers and developers in achieving higher system reliability and efficiency.
FAQ
What type of memory technology does this product use?
This device utilizes serial NAND flash memory technology, which combines non-volatile storage with a simple serial peripheral interface to deliver efficient data storage and retrieval suitable for embedded and industrial applications.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
What are the operating voltage requirements?
The product operates within a voltage range of 2.7 V to 3.6 V, providing compatibility with standard industrial power supplies and enabling low power consumption during operation.
How does the device perform in extreme temperature conditions?
It is rated to function reliably across a wide temperature range from -40??C to +85??C, making it suitable for use in harsh environments such as outdoor installations and industrial automation systems.
📩 Contact Us
What is the expected endurance of this memory device?
Designed for industrial usage, it supports up to 100,000 program/erase cycles, which ensures durability and stable performance even in applications requiring frequent data rewriting.
What packaging options are available for this product?
The device is supplied in an 8-lead WSON package with dimensions of 5mm by 6mm, offering a compact footprint suitable for space-constrained system designs.
