TMS320F28375DZWTT Overview
The TMS320F28375DZWTT description requested requires the official device sheet to ensure accurate technical content. I cannot invent electrical specifications, pinouts, clock rates, memory sizes, or package details. To create a precise, sourcer- and engineer-ready product page I need the referenced datasheet or product brief. Once provided I will extract all measurable values, list at least eight numeric specifications, and craft an SEO-friendly, comparison-rich narrative tailored for purchasing and design decisions. For manufacturer references, see IC Manufacturer for supply-chain and part-number cross-reference details.
TMS320F28375DZWTT Technical Specifications
| Parameter | Value / Source |
|---|---|
| Manufacturer | Refer to the supplied datasheet for the official manufacturer name and trademarked family. |
| Core / Architecture | Documented on the part sheet; exact core type and instruction set must be quoted from the sheet. |
| Maximum CPU clock | Numerical value available in the datasheet; include MHz or GHz as shown. |
| On-chip memory (Flash / RAM) | Exact flash and RAM sizes as listed in the sheet (kB or MB). |
| Analog / PWM peripherals | Counts and resolutions are provided in the datasheet; list ADC resolution, PWM channels, and timers. |
| Communication interfaces | Enumerate UART, SPI, I2C, CAN, Ethernet counts and speeds exactly as on the sheet. |
| Operating voltage range | Vmin?CVmax values appear on the product sheet and must be quoted verbatim. |
| Package / pins | Package code and total pin count are on the datasheet; include thermal or mounting notes from the sheet. |
| Temperature range | Manufactured device ambient operating range given in the sheet (??C). |
| Safety / regulatory notes | Any ESD ratings, certifications, or compliance statements found on the datasheet. |
TMS320F28375DZWTT Key Features
- Deterministic real-time processing ?? concrete core and cycle counts must be cited from the datasheet to show control-loop capability.
- Rich analog and PWM integration ?? consolidated on-chip peripherals reduce board count and lower BOM when verified against the sheet.
- High-speed interfaces ?? documented communication blocks improve system throughput and ease integration when matched to system buses.
- Robust packaging and thermal specs ?? built-in protection or package thermal performance reduces thermal design margin once pulled from the datasheet.
Typical Applications
- Motor control systems where tight loop timing, integrated PWMs, and deterministic interrupts are critical for torque and speed regulation over a wide load range.
- Power conversion and inverters in industrial drives and renewable-energy systems that require precise ADC sampling and synchronized PWM outputs for efficiency gains.
- Advanced sensing and data acquisition platforms that combine multiple high-resolution ADC channels with high-speed communications for telemetry and control.
- Embedded control in factory automation equipment that needs low-latency control, multiple fieldbus interfaces, and robust operating-temperature specifications.
TMS320F28375DZWTT Advantages vs Typical Alternatives
The product sheet is the single source to confirm how this device compares to alternatives. Use the datasheet to extract exact CPU frequency, memory sizes, peripheral counts, and thermal ratings. Those numeric comparisons show whether this part offers greater processing throughput, higher ADC resolution, or more PWM channels than competing parts. When the sheet is supplied I will translate those facts into clear advantages for purchasing and design, using direct numeric contrasts for quick sourcing decisions.
🔥 Best-Selling Products
TMS320F28375DZWTT Brand Info
The part number aligns with a well-known real-time digital-signal microcontroller family. The brand is widely used in industrial control and power-conversion sectors. Provide the official product brief or datasheet and I will create a concise brand introduction with exact family naming, lineage, and support ecosystem as listed by the manufacturer.
FAQ
What do you need to complete the spec sheet?
I need the original datasheet or product brief for this exact part number. The datasheet contains all numerical specs, package drawings, electrical characteristics, and peripheral descriptions required to produce accurate content.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Can you compare it to other devices?
Yes. With the datasheet I will extract numeric values for CPU speed, memory, ADC resolution, PWM counts, and interfaces and then compare those values directly against alternatives for engineers and sourcing teams.
Will you list exact pinout and package data?
Yes. Once the datasheet is provided I will transcribe package type, pin count, pin functions, and mechanical dimensions so PCB designers can verify footprint and assembly constraints.
📩 Contact Us
Can you prepare BOM and sourcing notes?
Yes. With the sheet I will include ordering codes, typical lead times, package variants, and cross-reference tips to help procurement and BOM optimization for production runs.
How fast can you deliver the full description?
After receiving the datasheet I can produce a full 1,000?C1,200 word product description, technical table, features, applications, advantages, brand section, and FAQ within one business day, with revisions as needed.