MSP430F5255IRGCT Overview
The MSP430F5255IRGCT is a member of the MSP430 family of ultra?low?power, 16?bit microcontrollers. To prepare a full, accurate product description strictly using the official product sheet, the original datasheet or product specification sheet is required. Once the official sheet is attached, a complete, specification?accurate description will be drafted with tables, measured numerical parameters, and precise peripheral counts. For sourcing and reference, see IC Manufacturer for vendor and footprint guidance. The text below outlines required sections and the information needed from the sheet to complete them.
MSP430F5255IRGCT Technical Specifications
| Attribute | Value (from product sheet) |
|---|---|
| CPU architecture | Refer to official datasheet for exact core details and maximum frequency. |
| Flash memory | Refer to official datasheet for exact flash size (KB). |
| RAM (SRAM) | Refer to official datasheet for exact RAM size (KB). |
| Operating voltage | Refer to official datasheet for the supported VCC range (V). |
| Max CPU frequency | Refer to official datasheet for maximum MCLK (MHz). |
| Package / pins | Refer to official datasheet for package type and pin count. |
| ADC resolution | Refer to official datasheet for ADC specification (bits). |
| Temperature range | Refer to official datasheet for industrial/operating temperature limits (??C). |
| Peripheral count (UART/SPI/I2C) | Refer to official datasheet for number of serial interfaces. |
| Packaging code | Refer to official datasheet for TI ordering and packaging suffix details. |
MSP430F5255IRGCT Key Features
- 16?bit core ?? Delivers efficient control for low?power sensing and timing tasks when verified on the datasheet.
- Integrated peripherals ?? On?chip analog and serial blocks reduce BOM and shorten board routing when confirmed by the official spec.
- Ultra?low power operation ?? Sleep and standby modes enable longer battery runtime; check datasheet for measured currents and modes.
- Package options ?? Compact package choices allow dense board designs; exact pinout and package dimensions are in the product sheet.
Typical Applications
- Battery?powered sensor nodes and wireless endpoints where low active and standby currents extend operational life over months or years.
- Industrial control and monitoring systems that require a compact 16?bit MCU with integrated serial peripherals for robust field communication.
- Portable instrumentation and handheld devices that need low system power and a small footprint to maximize run time and minimize PCB area.
- Embedded metering and data acquisition platforms that rely on integrated ADCs and timers for precise measurements and energy efficiency.
MSP430F5255IRGCT Advantages vs Typical Alternatives
The MSP430 series is known for lower active and standby power compared with many 8?/32?bit competitors. When assessed against typical alternatives, this device family provides a strong balance of control performance and power economy. With integrated analog and serial peripherals, it reduces external component count and system cost. Exact advantages in memory size, clock speed, ADC resolution, and package density should be verified against the official product sheet to quantify relative performance and BOM savings.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSP430F5255IRGCT Brand Info
MSP430F5255IRGCT is a Texas Instruments product from the MSP430 microcontroller family. TI positions MSP430 devices for ultra?low?power embedded applications and broad ecosystem support. The MSP430 line targets sensing, metering, and portable applications with a focus on power efficiency and integration.
FAQ
Where is the full datasheet?
The full datasheet and device specification are published on the manufacturer website. For the MSP430 series, consult Texas Instruments’ product page and download the official datasheet for pinouts, electrical characteristics, and timing tables.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Which package does IRGCT denote?
Package suffixes map to specific mechanical footprints and pin counts in manufacturer documentation. Confirm the exact package, dimensions, and land pattern in the official packing and mechanical data included with the datasheet.
How to confirm memory sizes?
Flash and RAM sizes appear in the functional and electrical sections of the datasheet, including memory map diagrams. Use those figures for firmware sizing and bootloader planning rather than distributor listings.
📩 Contact Us
What development tools support this MCU?
MSP430 devices are supported by TI’s development ecosystem, including IDEs, compilers, and debugger probes. Check the manufacturer tools page for specific toolchain compatibility and recommended evaluation boards for the device.
How to order and source reliably?
Order using the exact full part number and packaging code shown on the datasheet to ensure correct device revision. For high?volume programs, consult TI authorized distributors and request traceability and lot documentation from the supplier.