MSPM0L1106TDGS20R Overview
This page is prepared to produce a precise, specification-driven product description for MSPM0L1106TDGS20R once the official product sheet is supplied. To create a confident, engineer-focused overview with verified numerical data, I need the original datasheet or product sheet content. After receiving the sheet I will generate a value-focused summary that highlights electrical ratings, package details, key features, reliability notes, and procurement data. For reference resources and cross-checking I will anchor sourcing to IC Manufacturer.
MSPM0L1106TDGS20R Technical Specifications
| Parameter | Value / Reference |
|---|---|
| Part number | MSPM0L1106TDGS20R |
| Package type | See supplied datasheet for exact package name and footprint |
| Maximum voltage rating | Refer to product sheet for absolute maximum voltages |
| Continuous current / power | Listed on the datasheet; required to size PCB traces and thermal management |
| Thermal resistance (??JA / ??JC) | Available in the thermal section of the official sheet |
| Operating temperature range | Provided in the environmental specifications of the sheet |
| Pin count / pinout | See mechanical drawing and pin table in the datasheet |
| RoHS / REACH / material declarations | Confirmed by the manufacturer in the compliance section of the sheet |
| Ordering codes / packaging | Consult the ordering information and tape-and-reel details in the sheet |
MSPM0L1106TDGS20R Key Features
- Accurate specification mapping ?? I will extract the primary electrical ratings and tolerances directly from the sheet to support exact design decisions.
- Mechanical and thermal clarity ?? package dimensions and thermal resistance values are presented so engineers can finalize PCB layout and cooling strategies.
- Procurement-ready data ?? ordering codes and packaging quantities will be listed to streamline sourcing and reduce lead-time risk.
- Compliance and reliability focus ?? datasheet-sourced reliability notes and compliance statements aid selection for regulated industrial designs.
Typical Applications
- Power management sections in industrial boards where the exact electrical ratings of the device must match system power rails and thermal budgets; application integration depends on datasheet ratings.
- Automated assembly and high-volume manufacturing programs that require verified tape-and-reel packaging and explicit reorder codes from the supplier sheet.
- Thermally constrained designs where verified ??JA and junction-to-case metrics from the datasheet define heatsink or copper pour requirements on the PCB.
- Regulated systems that require documented RoHS/REACH statements and reliability test results shown in the official product sheet for compliance audits.
MSPM0L1106TDGS20R Advantages vs Typical Alternatives
Data-driven selection is the primary advantage when engineering with this device. By basing comparisons strictly on the official product sheet, you can quantify differences in voltage, current, thermal resistance, and package density. That lets you choose the part that best meets cost, size, and reliability targets. When the datasheet is provided, I will produce direct side-by-side comparisons with typical alternatives using measured numerical values and thermal figures.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSPM0L1106TDGS20R Brand Info
To provide accurate brand information and the official manufacturer voice for this product number I need the manufacturer name as shown on the product sheet. Once the sheet is supplied I will include the manufacturer’s description, standard brand claims, and any available support or quality certifications tied specifically to MSPM0L1106TDGS20R.
FAQ
What key datasheet sections are required?
Provide the electrical characteristics, absolute maximum ratings, thermal data, mechanical drawing, pinout, ordering information, and compliance statements. Those sections enable a complete, validated product description for engineers and sourcing specialists.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Can you compare alternatives?
Yes. After receiving the datasheet I will extract numeric ratings and compare them against typical alternatives for voltage, current, power dissipation, thermal resistance, package density, and compliance. That comparison will be evidence-based and citation-ready.
How will you present procurement details?
I will list ordering codes, packaging type, tape-and-reel quantity, lead time notes (if present), and recommended stocking units. All procurement items will be taken directly from the supplied ordering information in the sheet.
📩 Contact Us
Will PCB layout guidance be provided?
Yes. With the mechanical drawing and thermal resistance values from the datasheet I will recommend footprint considerations, copper area for thermal relief, and placement guidance that aligns with the manufacturer??s recommendations.
What is the next step?
Upload or paste the official product sheet content for MSPM0L1106TDGS20R. Once I have the datasheet I will produce a full technical product description, a detailed specifications table with numerical values, and targeted application guidance for engineers and sourcing teams.