MSPM0L1306SDGS20R Overview
The MSPM0L1306SDGS20R entry is identified by its complete ordering code and must be documented directly from the official product datasheet for accurate electrical, thermal and mechanical data. This overview only uses the supplied part identifier and emphasizes verification of the component??s ratings, package and supply chain status prior to design or procurement. For authorized specifications and lifecycle status consult the manufacturer’s published document or distributor product page and the central catalog at IC Manufacturer for cross-reference and ordering information.
MSPM0L1306SDGS20R Technical Specifications
| Parameter | Value / Reference |
|---|---|
| Ordering code | MSPM0L1306SDGS20R ?? use exact string when searching manufacturer or distributor records |
| Device type | Refer to the official datasheet section that defines the device family and electrical class for the exact category |
| Package | Check the mechanical drawings in the datasheet for package name, outline dimensions and recommended PCB land pattern |
| Absolute maximum ratings | See the datasheet table labeled “Absolute Maximum Ratings” for voltage, current and power limits with numeric values and test conditions |
| Electrical characteristics | Refer to “Electrical Characteristics” section for numeric RDS(on), threshold voltages, leakage and timing parameters under specified conditions |
| Thermal parameters | Consult thermal resistance, junction-to-ambient and junction-to-case numbers in the datasheet to calculate safe operating area |
| Operating temperature range | Find the rated minimum and maximum junction or ambient temperatures in the datasheet to confirm suitability for your thermal environment |
| Packaging and quantity | Datasheet or distributor packaging table lists reel, tape-and-reel, box quantities and ordering multiples for procurement |
| Compliance and approvals | Look for RoHS, REACH and any agency approvals claimed by the manufacturer in the regulatory compliance section |
| Typical performance curves | Examine characteristic graphs in the datasheet for transfer curves, output characteristics and temperature dependence |
| Recommended operating conditions | Use the section titled “Recommended Operating Conditions” to extract bias voltages, current ranges and recommended test conditions |
| Test and measurement conditions | Verify the exact measurement conditions used in datasheet tables such as VGS, TA, and test circuits to compare apples-to-apples |
MSPM0L1306SDGS20R Key Features
- Clear, traceable ordering code that guarantees exact part matching across distributors and BOM systems.
- Manufacturer datasheet driven specification fidelity, enabling accurate thermal and electrical design decisions.
- Defined packaging and procurement options to improve assembly yield and reduce sourcing risk when buying in production quantities.
- Compliance and test-condition references that help validate reliability and simplify regulatory checks during qualification.
Typical Applications
- Power-management and switching designs where the design engineer must verify voltage, current and RDS(on) values directly from the datasheet before PCB layout.
- Automotive or industrial modules that require confirmed compliance and thermal derating data from the official manufacturer documentation prior to qualification testing.
- High-volume production sourcing where packaging options, reel quantities and exact part number matching reduce procurement errors and improve assembly line throughput.
- Prototype and lab evaluations that depend on the datasheet??s typical performance curves, test circuits and measurement conditions to reproduce expected behavior.
MSPM0L1306SDGS20R Advantages vs Typical Alternatives
Using the MSPM0L1306SDGS20R ordering code as the authoritative identifier reduces ambiguity versus partial or shorthand part numbers. With the official datasheet, engineers gain direct access to the precise electrical, thermal and mechanical metrics required to compare alternatives by numbers rather than by similar names. That direct linkage shortens evaluation time, lowers sourcing mistakes and helps procurement compare package, reel quantity and compliance claims across multiple vendors with confidence.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
MSPM0L1306SDGS20R Brand Info
The brand and manufacturer for MSPM0L1306SDGS20R must be confirmed from the part??s datasheet or authorized distributor records. Manufacturer identity, recommended application notes and support tools are published with the datasheet and will indicate authorized lifecycle status, contact channels and warranty terms for design-in and sourcing workflows.
FAQ
How do I get the official datasheet?
Locate the official datasheet through the manufacturer??s website or an authorized distributor by searching the exact ordering code. The datasheet contains definitive electrical tables, mechanical drawings and recommended application circuits that are required for safe integration.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
Can I substitute similar part numbers?
Substitution requires comparing numeric datasheet parameters such as voltage rating, current capability, RDS(on), thermal resistance and package dimensions. Always cross-check measurement conditions and derating curves before accepting a replacement.
Where to verify packaging and reel quantities?
Packaging options and reel quantities are listed in the datasheet packaging table and on distributor product pages; use those sources to confirm minimum order quantities and tape-and-reel orientation for automated assembly.
📩 Contact Us
How to confirm regulatory compliance?
Confirm RoHS, REACH and any agency approvals by checking the compliance section of the datasheet or the manufacturer’s compliance declarations to ensure the part meets your project??s certification requirements.
Who to contact for technical support?
Contact the manufacturer??s field application engineering or the authorized distributor technical support referenced in the datasheet or product listing; they can supply application notes, test setups and clarification on test conditions used in the published tables.