RM44L520APGET Overview
The entry below documents the RM44L520APGET as an industrial semiconductor product. The content that follows is prepared to align with an official product sheet and focuses on technical value, sourcing guidance, and application relevance. To produce precise numerical specifications, package details, and electrical characteristics, the original datasheet or product specification sheet is required. Refer to the official supplier resource at IC Manufacturer for the authoritative datasheet and ordering information.
RM44L520APGET Technical Specifications
| Parameter | Specification (see sheet) |
|---|---|
| Part number | RM44L520APGET |
| Device type | Refer to product sheet for exact device family and function |
| Supply voltage | Refer to datasheet for recommended operating voltage range |
| Operating temperature | Refer to datasheet for industrial temperature rating |
| Memory / Capacity | See official specification for memory size and organization |
| Package type | See datasheet for package outline and pin count |
| Maximum current consumption | See electrical characteristics table in product sheet |
| Absolute maximum ratings | Listed in the official datasheet; reference required |
| Regulatory / reliability | Refer to product sheet for qualification and life-test data |
RM44L520APGET Key Features
- Core capability listed on the official sheet: consult it to understand the primary function and how it delivers system-level value.
- Specified performance metrics and tolerances: the datasheet explains why these matter for integration and system reliability.
- Efficiency and thermal guidance: the product sheet provides thermal resistance and recommended PCB layout to improve power efficiency.
- Integration notes and recommended operating conditions: manufacturer guidance in the datasheet reduces evaluation time and risk during design-in.
Typical Applications
- Embedded control modules where durable, documented semiconductor components are required and where datasheet-driven design practices improve development velocity and quality assurance.
- Industrial automation endpoints that depend on verified electrical characteristics and environmental ratings to meet long-term field reliability and certification demands.
- Power management or signal processing assemblies that require precise electrical parameters from the product specification to ensure correct interfacing with other subsystems.
- OEM production lines where procurement and lifecycle planning need the manufacturer??s ordering codes, qualification reports, and recommended handling instructions from the official document.
RM44L520APGET Advantages vs Typical Alternatives
The primary advantage of this device is the availability of a formal product sheet that defines electrical characteristics, environmental limits, and mechanical outlines. Compared with typical alternatives lacking authoritative documentation, parts with a complete datasheet reduce design risk, speed validation, and support compliance processes. Use the official sheet to compare numerical performance, package density, and thermal limits against competing devices for accurate BOM and sourcing decisions.
🔥 Best-Selling Products
-
Texas Instruments BQ24075 Linear Battery Charger IC – 5mm x 4mm QFN Package
-
Texas Instruments INA219 Current Sensor Module – SOIC Package, Precision Monitoring
-
Texas Instruments LM4041 Precision Voltage Reference – SOT-23 Package
-
Texas Instruments OPA2134 Audio Op Amp – Dual, High-Performance, SOIC-8 Package
RM44L520APGET Brand Info
RM44L520APGET is listed under the manufacturer identified in the official documentation. The brand offers detailed datasheets, ordering information, and technical support for customers designing the part into industrial applications. Consult the manufacturer??s website and authorized distributor channels for the most current revision and supply-chain status.
FAQ
Where is the full datasheet?
The definitive datasheet is available from the device manufacturer and authorized distributors. The sheet contains pinouts, electrical characteristics, thermal data, mechanical drawings, and recommended operating conditions required for design and sourcing.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How do I verify authenticity?
Confirm part authenticity by ordering through authorized distributors, cross-referencing the manufacturer’s datasheet revision, and validating shipment traceability and label information provided with the product.
What information is critical for PCB layout?
Follow the package outline, recommended land pattern, thermal pad instructions, and thermal-resistance data from the datasheet to achieve expected thermal performance and signal integrity on the PCB.
📩 Contact Us
Can I get reliability or qualification data?
Reliability, qualification, and life-test reports are provided by the manufacturer; request these documents from the vendor or consult the product page on the manufacturer??s site for available qualification summaries.
Who should I contact for technical support?
Contact the manufacturer??s technical support or your authorized distributor for application notes, verified reference designs, and clarification of datasheet items prior to production release or long-term procurement.