QCC-730M-1-LGM42A-MT-00-0-AB Overview
The QCC-730M-1-LGM42A-MT-00-0-AB is listed by part number for evaluation and sourcing. This fragment summarizes what can be derived from the supplied identifier and explains what is required to create an authoritative, engineering-grade product brief. For accurate electrical, mechanical and RF parameters, attach the official product specification sheet or paste its content. Use the link below for vendor contact and additional resources: IC Manufacturer.
QCC-730M-1-LGM42A-MT-00-0-AB Technical Specifications
| Parameter | Value / Note |
|---|---|
| Full part number | QCC-730M-1-LGM42A-MT-00-0-AB |
| Package / Module ID | See official product sheet for exact package details |
| Supply voltage | Refer to attached specification for voltage range and limits |
| Operating temperature range | Documented on datasheet; required for thermal design |
| Interface options | Check datasheet for supported host interfaces and GPIO counts |
| RF certification status | See manufacturer sheet for region and module approvals |
| Typical power consumption | Provided in datasheet per operating mode |
| Mechanical dimensions | Length ?? width ?? height listed on mechanical drawing |
| Recommended PCB footprint | Refer to module mechanical drawing and land-pattern |
| Ordering & packaging | Quantity per reel or tray and box weight provided on packing list |
QCC-730M-1-LGM42A-MT-00-0-AB Key Features
- Clear identification: Full part number allows purchase orders and RFQ matching against vendor catalogs.
- Document-driven selection: The part relies on the official datasheet for exact electrical and mechanical parameters, which reduces integration risk when used.
- Compliance dependency: RF and regulatory approvals are confirmed by the product sheet, which matters for faster time-to-market in region-specific programs.
- Sourcing readiness: Ordering codes and packaging information in the product documentation streamline procurement and inventory planning.
Typical Applications
- Reference designs and evaluation boards where the full datasheet is used to verify host interface compatibility, power budgets, and mechanical fit before PCB layout.
- Prototype and engineering validation tasks that require the exact thermal and power specifications from the datasheet for stress testing and reliability analysis.
- Regulatory pre-checks and market rollout planning that depend on explicit certification listings and test reports provided in the product documentation.
- Sourcing and supply-chain planning where packaging, MOQ, lead time, and part variants are confirmed directly from the vendor packing and ordering documentation.
QCC-730M-1-LGM42A-MT-00-0-AB Advantages vs Typical Alternatives
Assessment of advantages requires the official datasheet and certificate files. With those documents, engineers compare thermal numbers, current draw, pin count, and certification scope against alternative modules. The part number itself helps reduce ambiguity in RFQ and BOM processes versus generic descriptions. Using the authoritative product document supports faster validation and fewer engineering change orders, which typically reduces integration time and cost versus alternatives with incomplete documentation.
🔥 Best-Selling Products
QCC-730M-1-LGM42A-MT-00-0-AB Brand Info
I cannot perform live web searches from this interface. To write accurate brand and corporate voice content, attach the vendor or manufacturer documentation or confirm the brand name associated with this part number. With that confirmation, I will produce a concise brand introduction tailored to sourcing specialists and design engineers.
FAQ
Where is the datasheet?
Datasheets and mechanical drawings are hosted by the manufacturer or authorized distributors. Attach the PDF or paste its text here so I can extract precise electrical and mechanical parameters for engineering use.
🌟 Featured Products
-
“Buy MAX9312ECJ+ Precision Voltage Comparator in DIP Package for Reliable Performance”
-
QCC-711-1-MQFN48C-TR-03-1 Bluetooth Audio SoC with MQFN48C Package
-
0339-671-TLM-E Model – High-Performance TLM-E Package for Enhanced Functionality
-
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
How to verify certifications?
Certification details such as CE, FCC, IC, or local approvals are listed in the product compliance section of the datasheet. Request the test reports or certificate numbers from your vendor to confirm regional compliance.
What information is needed for PCB layout?
For PCB layout you need the mechanical drawing, land-pattern, pin mapping, and thermal notes. Supply the module mechanical files to generate accurate footprints and thermal vias recommendations.
📩 Contact Us
How to place an order?
Submit the full part number with required quantity to your authorized distributor. Confirm lead times, MOQ, and packing details from the vendor packing list or order confirmation before issuing the purchase order.
Can you compare this part?
I can perform a side-by-side comparison with alternatives once you provide the datasheet and any competitor datasheets. That information is required to compare numeric values like voltage, current, and dimensions accurately.
